Gradiente Repair Tips

Search: Gradiente
Results: 1318

Make	Model	Symptom	Problem	Solution	By
GRADIENTE	TF 2140 TV	Turn on and off	Check cold solders on the c 922 capacitor (this chassis is the same from philco)		Ademar
GRADIENTE	VARIOS TV	Does not memorize	Obs. When the TV uses 16 a ram memory it can be replaced by 24c16		Ademar
GRADIENTE	1420/2020 TV	Enter service mode	Press control menu and TV menu together to change screen, press TV menu and to exit, press display button on the control		Ademar
GRADIENTE	1420/2020 TV	Vertical half closed	Check r 320		Ademar
GRADIENTE	HT-M277	It didn't turn on, it just threatened with a closed vertical when the screen increased	I changed the c.i of the vertical but flay killing the +b when changed it threatened to turn on with sound without image and turn off in 5s	After checking the horizontal circuit I found the wide caps with low capacitance, I replaced them and invoiced them. good luck	serginhosond
GRADIENTE	GT 2010	It is only in high display	2.4 x 300 battery	Replace battery	MAURI JUNIOR
GRADIENTE	GT2925	There is no normal video and audio and the video in the a/v also does not work	Q802 2sc1740 that connects to pin 12 of the ic801 (located on the ac control module board)		simas433
GRADIENTE	HTM277	White lines at the top of the screen	1r resistor position r542 changed	Replace the same	eletronica newtec
GRADIENTE	TV2922	High power supply	Shorted micronas, requiring excessive current from regulators ic 801, 802, 803, 805, which in turn requiring excessive current from d 804 when switching off l802 the power supply normalizes, if the regulators are shorted it can also cause this defect.	Replace the microwave	Ricardo Alves- Eletrônica do Ricardo- Caeté MG
GRADIENTE	HTM 277S	Vertical closing, image only in the center of the screen..	Capacitor 2200mf 25 volts, seco	Replace for a new one	Ricardo Alves -Eletrônica do Ricardo- Caeté MG
GRADIENTE	M-38I	Turns off by itself	Q-542	Rip it off and throw it in the trash.	This email address is being protected from spambots. You need JavaScript enabled to view it.
GRADIENTE	GBT 2011	TV works with a loud whistle in the power supply trafo and strange colors	Check smd capacitor connected to tl 431 and smd resistor in series with it	Resolder or replace if necessary	domingos macedo
GRADIENTE	TV2020	Bu808dfi (q401) burning without apparent cause	D809 change without measuring	Turning off the horiz deflector. high voltage appears (lack of power supply amp) d809 c809	Alextecnico
GRADIENTE	GT2022	TV does not arm, the power supply has 160v in the capacitor	As incredible as it may seem, the ignition key had one side open.		fio
GRADIENTE	TF 2140	Led pincando	Resolder 701 resistor due to terminal insulating glue		SANDRO SALA
GRADIENTE	HT-M299S	Image flapping type: opening and closing in horizontal direction	Resistor r423 altered no pine 4 do ic401 la7840 saida vertical		markinhos
GRADIENTE	TV2924	Call without video and without sound	Epron exchange		SIDNEY ALVES
GRADIENTE	D 201 D201	Starts reading DVD, turns off by itself	Replace cap. cec10 470x16v		This email address is being protected from spambots. You need JavaScript enabled to view it.
DVD - GRADIENTE	D-470 PADRãO	Turns off randomly, doesn't always obey control commands, changes tracks when playing music, freezes image on DVD.	I changed all the micro-switches on the panel and it didn't help. I thought it was the processor. By a happy coincidence, a colleague asked me for a random reader to do a test. I removed it from the gradient that was in my hands and available. my colleague detected that there were operating variations in the component. I decided to put another one and the problem was solved. I had almost thrown in the towel. the gradient was saved by a gong.		csc eletronica
DVD - GRADIENTE	D-470 PADRãO	Turns off randomly, doesn't always obey control commands, changes tracks when playing music, freezes image on DVD.	I changed all the micro-switches on the panel and it didn't help. I thought it was the processor. By a happy coincidence, a colleague asked me for a random reader to do a test. I removed it from the gradient that was in my hands and available. My colleague detected that there were operating variations in his equipment. I decided to put another one and the problem was solved.		csc eletronica