Mitsubishi Repair Tips
Search: mitsubishi
Results: 1346
Results: 1346
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
MITSUBISHI |
TC - 2010
|
Black band at the bottom of the tube | C - 453 de 220 uf 25v | Replace | Mauro Mascarenha Tel. (88) 981422821 Parazinho - ce |
MITSUBISHI |
TC-2010
|
Image kind of erased, blurred, similar to a weak tube | Abl capacitor pin near the flyback on the acl output with cold solder | Resolder the capacitor and problem solved | |
MITSUBISHI |
TC-2009
|
Half closed image | Altered vertical ci do la7837 | paulistana pi | |
MITSUBISHI |
TC-1418PS
|
It just stays on standby and doesn't turn on | R571 de 8.2Ω | Replace r571 burned | Gilson S.E |
MITSUBISHI |
TC 1410
|
High horizontal voltage of 200 v | 1 k resistor open position 955 near the coupler | Joel som | |
MITSUBISHI |
TC-2010
|
Very dark image | Capacitor c653 | Eletronica tensao R Jacuipe | |
MITSUBISHI |
TC-2010
|
Very dark image | Capacitor c653 | Tec flavio | |
MITSUBISHI |
TC -2098
|
TV does not turn on power supplys oscillating with noise tic tic tic type symptom of burnt horizontal th | The problem was the primary power supply capacitor c 907 of 22uf x 100v exhausted | After changing it, the TV works again | ASSISTEC MANARI-PE |
MITSUBISHI |
TC-2018 PS
|
Does not oscillate | R571 does more b fly.black | JOSE HUMBERTO F SANTOS | |
MITSUBISHI |
TC 2010
|
Does not turn on the power supply making tic, tic, tic, tic, tic...tic | In my case it was a 470pf capacitor under the board in position c564. he was short. | Capacitor under the board in position c564 shorted. | MARCONES DE ARARIPINA-PE |
MITSUBISHI |
TC-2018PS
|
Stand-by LED access activates the key to turn on and nothing happens, | After changing several suspicious components with no results, I decided to change the ci 101 microprocessor and the TV returned to normal operation. | Val | |
MITSUBISHI |
TC 2018 PS
|
Does not come out of stand by | Drive transformer, close to the fly back | NEW PEK ELETRÔNICA | |
MITSUBISHI |
TC 2918PS
|
TV burning horizontal output | Capacitor c571, take it from the horizontal drive transformer, it was dry, solution to change, capacitor value 1mf for 160 vdc, | Dinei Botelho | |
MITSUBISHI |
TC-1410
|
LED is on but won't turn on | The cause of the defect was r571 and c567 | Replace of the same | ASSISTEC |
MITSUBISHI |
TC 2050
|
Normal image, and no sound. just a loud noise in the phone. | Capacitor 2200uf/25v na power supply seco. | MARCONES DE ARARIPINA-PE | |
MITSUBISHI |
TC1410
|
Stand by led on, when pressing the power button it turns off, but tsound is no image | Resistor 571 8r2 open | ||
MITSUBISHI |
TC1410
EV02 |
Plugs into the socket and only turns on stand by by pressing the on button, it turns off and does not generate high voltage | Resistor r571 8r2 was open and the replace was successful. | fabricio lima | |
MITSUBISHI |
CT-14MS1LM
|
Image reverting back to dark screen after turning up the brightness in the menu. | R563 rusted open. | Replaced r563 = 220k. | shagster |
MITSUBISHI |
TC 1410
|
The red standby light turns on, pressing the power key turns off the LED and does nothing, it doesn't oscillate. | Open 6r8 3w resistor r571 and cap c567 in bad line pin 9 of the flyback | ||
MITSUBISHI |
TC-2018PS
|
Saturated image, no sound | Defective 7809 regulator | Component replacement. | NiloTech |