Search: mitsubishi
Results: 1346
Make Model Symptom Problem Solution By
MITSUBISHI TC - 2010
Black band at the bottom of the tube C - 453 de 220 uf 25v Replace Mauro Mascarenha Tel. (88) 981422821 Parazinho - ce
MITSUBISHI TC-2010
Image kind of erased, blurred, similar to a weak tube Abl capacitor pin near the flyback on the acl output with cold solder Resolder the capacitor and problem solved
MITSUBISHI TC-2009
Half closed image Altered vertical ci do la7837 paulistana pi
MITSUBISHI TC-1418PS
It just stays on standby and doesn't turn on R571 de 8.2Ω Replace r571 burned Gilson S.E
MITSUBISHI TC 1410
High horizontal voltage of 200 v 1 k resistor open position 955 near the coupler Joel som
MITSUBISHI TC-2010
Very dark image Capacitor c653 Eletronica tensao R Jacuipe
MITSUBISHI TC-2010
Very dark image Capacitor c653 Tec flavio
MITSUBISHI TC -2098
TV does not turn on power supplys oscillating with noise tic tic tic type symptom of burnt horizontal th The problem was the primary power supply capacitor c 907 of 22uf x 100v exhausted After changing it, the TV works again ASSISTEC MANARI-PE
MITSUBISHI TC-2018 PS
Does not oscillate R571 does more b fly.black JOSE HUMBERTO F SANTOS
MITSUBISHI TC 2010
Does not turn on the power supply making tic, tic, tic, tic, tic...tic In my case it was a 470pf capacitor under the board in position c564. he was short. Capacitor under the board in position c564 shorted. MARCONES DE ARARIPINA-PE
MITSUBISHI TC-2018PS
Stand-by LED access activates the key to turn on and nothing happens, After changing several suspicious components with no results, I decided to change the ci 101 microprocessor and the TV returned to normal operation. Val
MITSUBISHI TC 2018 PS
Does not come out of stand by Drive transformer, close to the fly back NEW PEK ELETRÔNICA
MITSUBISHI TC 2918PS
TV burning horizontal output Capacitor c571, take it from the horizontal drive transformer, it was dry, solution to change, capacitor value 1mf for 160 vdc, Dinei Botelho
MITSUBISHI TC-1410
LED is on but won't turn on The cause of the defect was r571 and c567 Replace of the same ASSISTEC
MITSUBISHI TC 2050
Normal image, and no sound. just a loud noise in the phone. Capacitor 2200uf/25v na power supply seco. MARCONES DE ARARIPINA-PE
MITSUBISHI TC1410
Stand by led on, when pressing the power button it turns off, but tsound is no image Resistor 571 8r2 open
MITSUBISHI TC1410
EV02
Plugs into the socket and only turns on stand by by pressing the on button, it turns off and does not generate high voltage Resistor r571 8r2 was open and the replace was successful. fabricio lima
MITSUBISHI CT-14MS1LM
Image reverting back to dark screen after turning up the brightness in the menu. R563 rusted open. Replaced r563 = 220k. shagster
MITSUBISHI TC 1410
The red standby light turns on, pressing the power key turns off the LED and does nothing, it doesn't oscillate. Open 6r8 3w resistor r571 and cap c567 in bad line pin 9 of the flyback
MITSUBISHI TC-2018PS
Saturated image, no sound Defective 7809 regulator Component replacement. NiloTech