Lg Repair Tips

Search: lg
Results: 4878

Make	Model	Symptom	Problem	Solution	By
LG	37LG30R	It doesn't turn on and the LED blinks a few times and the TV doesn't turn on, and when it's turned off using the remote it won't turn on again.	Remove the protection components	Remove (c108, zd111 and zd112)	johnny busnadiego
LG	32LG30R	It doesn't turn on and the LED blinks a few times and the TV doesn't turn on, and when it's turned off using the control, it doesn't turn on again.	Remove the protection components	Remove (c108, zd111 and zd112)	johnny busnadiego
LG	CP-20	Just white screen with no image and no characters	5v zener diode. zd803 partial short.	This diode powers the computer and, after changing the diode, the TV. returned to normal.	BF.COLATINO
LG	RP21FD10	Doesn't start	The standby is on, when I press the channel button the LED flashes but does not go off.	Solved was the fly back.	BF.COLATINO
LG	29CC2RL	TV with wavy image on the sides and colors varying from cyan to red to green	Changed the main micro and problem resolved.		BF.COLATINO
DVD LG	DK140	Drawer opening and closing non-stop.	Drawer opener key	Resolved with replacement.	BF.COLATINO
LG	21FX5RL	LED is on, when you turn on the LED goes off and comes back on. vcch=9v pin 19 of ic 501 showed 0v	Resolved by replacing the c523-470uf/16v which is leaking.		BF.COLATINO
LG	CP14B86 CP14B86	Very dark image looked like counter hand	D405	So Jesus can save! ef 2:8-9	ozenildo alves da silva
LG	42LG30R	When it turned off, it only turned back on after many hours	Replace the 11k r128 with an 18k one, as per Mr.'s tip. luiz melo. it was ok.		Francisco Rocha
LG	21FU4RL	Bulged sides	Q 405 (a1659a)		HP ELETRONICA
LG	LM-U1050A	Turns on but no sound or very low sound	30 volt power supply without power	Replace i.c. regulator 901 (str-x6759n) and r907 (180Ω) on pin 7 of the regulator. Check all components in this power supply.	ELETRONICA FERNANDES
LG	RP20	Burning, horizontal exit.	Put d 2670 in place of tt 2170 if you cannot find an original part.	D 2670 not place of tt 2170	tyko
LG	RP CC 26	Doesn't tune in to any channel, just drizzle, with oscillations on the screen as if something were going to appear	This TV appeared sound with this symptom and the seletronic power supply was ok but no channel was working, I resoldered the micronas pins and nothing, I decided to do a test with the memory and it was defective, I re-recorded it and it was ok, it was new.	Rewrite memory	moroni eletronica
LG	CP-14B85	Contrast did not work, dark image.	Diode 502	Barter it	valter
LG	CP29K35A	TV turns on and off, with no sound and no image, it only generates high voltage. the moment it is turned on using the maste power key	Capacitor c 823 shorted	Replace the capacitor, put one with greater insulation.	DEBIQUE(ELETRONICA ROBSON)
LG	RP21FE85G	Power supply activates relay and then disarms, it only works when you touch the board.	Integrated IC 501 featuring cold soldering.	After resoldering the IC 501, the TV worked normally.	TOPMAR ELETRONICA
LG	RP14CB25A	LED stand by blinking, power supply measurements oscillating at the same rhythm. TV without sound and image.cause:	Zd 851 shorted. solution: replace it		vilmar Egidio
LG	RP CC26	I don't tune in to any channels, it's just raining	Water entry through the seletronic causes oxidation on the box pins + damage to the zed 122 diode and rupture of the box filament on the sda line		moroni eletronica
LG	RP20CB25A	TV turning off after 1 to 2 or 3 minutes, every time it is turned on normally.	Fr 403 1r2 2w with changed value	Just replace the 1r2 resistor and the TV worked correctly	João Carlos
LG	RP-29FA35A/CP29K35A MC-049A	Turns on and off, then the LED flashes and goes off, tsound is no voltage on the second	VCC 13V voltage is missing on pin 4 IC802 (coupler photo)	Resistor r809 1k aberto no pino 4 do ic802	JURALIMA