Lg Repair Tips

Search: lg
Results: 4931

Make	Model	Symptom	Problem	Solution	By
LG	21FB32BRS RP 21FB32	LED on, press key, start, oscillate and cut off	Flay bek	Just replace and run for joy	eletronica martins ubatuba
LG	42LG60FR	Catching fire in the power supply capacitor c 700 220k x 450v	C 700 220k x 450v	220k x 450 v	ELETRONICA MAURI JUNIOR
LG	32LD420	Screen flashes 3 to 4 times and turns off	Diodo zener com fuga d512 15v		Alvaro (prolar)
LG	CP-20B85	It doesn't oscillate, it just turns on the LED.	C406 100uf 16v dia de ze dias	Replace	EletroClaudio Aguas Belas
LG	CP20B85	Lack of contrast.	D=502 open	Replace for a 1n 4148 and blz	ELETRONICA MEDEIROS
LG	21FU1RLG	Does not tune the channels.	30 volts of tuning voltage were missing. the resistor 114 (30k) was open, I replaced it and everything was ok.		valmirgold
LG	RP-20CC25	STBY LED goes out, normal sound on all channels and normal secondary voltages, but the horizontal one does not start.	Cold solder between the metal ring used to reinforce the solder on terminal 1 of the flyback and horizontal output collector.	A little tip: this cold solder was invisible even with the magnifying glass. I solved it as I usually do with this type of crack: preferably at night, turn off all the lights in the workshop and lightly twist the plate, a small spark should appear, mark the spark point and turn on the lights and redo the welding, it's a shot and fall. I delete them all	Altevir Lima/ Valparaíso Eletrônica/ PA
LG	21FJ6RB	This TV gave me a lot of trouble, it arrived with a burnt horizontal outlet, I replaced the horizontal outlet and the TV didn't work, it turned on and then came apart, I replaced everything that was part and it didn't solve it, after a lot of patience I discovered the defect was a 1k pressure resistance r842 near the transformer.	1k precision resistor position r842		Diego lima nova timboteua
LG	21 FU1RL L3	It takes a long time to turn on and when it does turn on it has a black stripe at the bottom.	C307 and c311 with low capacitance.	Replace c307 and c311.	Rondinele
LG	20CC25	White screen with retrace	Ic-501 with the rgb outputs with voltage above normal, then just change d-502 which was leaking for the contrast to act normally. hug		jorge fontes
LG	T730SH	Monitor turned on but had little brightness, to appear the image you had to enlarge the screen	C346 of 103x2kv little changed and ic303 lm2476tb	I replaced the c346 and the image improved a little, but with little brightness and the image flickering. I replaced the ic303 and it immediately resolved the problem of image flickering and low brightness.	RICARDO MARQUES
LG	Z1FU4RL L3	When turned on, the stand bay turned on, when activated, it turned on and off immediately and did not start	C-308 47x16 dry	Replace it for another like it	ELETRONICA CAVALCANTE EM MARTINOPOLE-CE
LG	RP 14CB25A MC - 059A	Doesn't start	Resistor 401 (47r)	Replace the same.	BARRETO CRUZ
LG	RP 14CB25A MC - 059A	Screen sometimes pink sometimes cyan	Ic - 501 (6319r55y7)	Replace the same.	BARRETO CRUZ
LG	CP 14J50 MC-83A	Vertical with band at the bottom and stretched, swinging.	Capacitor c316.	Replace capacitor c316 (connected to pin 22 of ic501) and c307 of 100 x 35v.	R-TEC Eletrônica
LG	32LG30R LP81A	When turning on the LED flashes twice	Deficiency of the pfc circuit (power factor correction), altered feedback resistors	The values of the first 4 are 620kΩ, and replace the last resistor (820Ω) with 1kΩ and that's it.	leitemarcellus
LG	29FU6TL	With vertical closed from the middle up	Open diode	Diodo d301 1n4005	hemersonlim
LG	RP-14CB20A	Dark image, contrast does not work.	D502 with escape.		Persio(TVCompany)
LG	42PJ250 PB02A	Does not turn on, stand by inoperative	Short circuit on the +5_vst line, c 502 (10uf/10v)	Replace c 502 (10μF/10v)	leitemarcellus
LG	21FX5RL-LD	Doesn't start	Q 804 (bc -337)	Replace the same.	BARRETO CRUZ