Lg Repair Tips
Search: lg
Results: 4929
Results: 4929
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| LG |
CP 29C85
|
Does not turn on, LED blinks | Dz 808 | alexander | |
| LG |
STUDIOWORKS 500G
|
Doesn't turn on and ticks | Q903 e c971 (47uf x 160v | Mizael | |
| LG |
21FJ4AB
MC-059A |
When giving power the horizontal output transistor burns | Open resistor r816/91kΩ | Replace and tv ok | edu |
| LG |
MCD-112
|
No sound | Reset, stop on front and nº2 on remote control simultaneously | edu | |
| LG |
MONITOR LCD L1753T-SF
|
Turns on but the screen goes off immediately | Inverter transformer with one winding open | Replace | paulo-maceio/al |
| LG |
CP20J52
|
Video slows down, dark and intermittent, normal sound. | D405 = 1n4148 shorted | Araujotec | |
| LG |
21FS4RLG
|
Blurred and retracted image | You change the flyback socket and it doesn't solve it | Remove the plate from the tube, turn it on, wait for it to turn on, then with it turned on, you plug and unclip the card a few times and then the damn thing goes back to normal. | MORAES SPTV CAMPINAS |
| LG |
29CC2RL
|
Doesn't start | Photo-coupler | Silva2 | |
| LG |
RP29FA35A
|
Activating protection | Diodo d404 | BEIVIDAS SERVICE | |
| LG |
20 PRETA
|
Vertical closed!! | Fr 301 | Perse | |
| LG |
20 PRETA
|
Funq, funq... don't gun! | Cold solder no t 801 | Perse | |
| LG |
21FU4RL
|
Vertical folding | C311 (cap completely 2200uf *25volt) | Replace, check line components. | JDANTEX |
| LG |
CP 20B85BRS
|
Without image, with sound | Q 904 on the crt board | FERNANDO S | |
| LG |
CP29C84M
|
Doesn't work: | The 9volt regulator was shorted, which derives this voltage to the hvcc. | Replaced, the TV returned to normal. | lucas40 |
| LG |
DR-175B
|
Crazy dvd without control goes on demonstration turns off turns on inoperative | Power touch key | Replace | Eletroclaudio Aguas Belas PE |
| LG |
RP-20CC20
|
Dark screen, asezo filament with sound. | (solved) measuring the +bs they were all normal, except the screen voltage which was +/- 200v. releasing the screen wire and measuring the voltage, maximum 400v. it was wrong, it should go to 700v +/-. we released the focus wire, and we measured the screen voltage, and manipulated the potentiometer, the voltage went to 700v +/-. the socket was leaking. replaced, the TV returned to normal. | lucas40 | |
| LG |
29FX5R
|
Vertical closed | Replace the vertical output and the rf405 resistor | Resolved | Jiliarde, fabrcio e cristiano |
| LG |
RP20CC25
|
Doesn't tune the channel, it just keeps drizzling | Varicap | Replace -lo | Eletroclaudio Aguas Belas PE |
| LG |
FLATRON L192WS
|
Monitor turns on and after a few seconds the lights turn off | Due to oxidation on the terminal of the inverter lamps, it was just a matter of cleaning and re-soldering it and that's it. The problem is that you have to disassemble the entire display. | jOÃO VICTOR | |
| LG |
21FS4RLG-LS
|
Does not turn on, turns on standby | I used the hairdryer-humidity | vida |