Search: philips
Results: 14210
Make Model Symptom Problem Solution By
PHILIPS 20CN4362
NCF
Sem vertical Raadid a, right jose almeida tavares
PHILIPS 29PT4635
Horizontal does not open fully, return lines Check transistors 7461=bc337 7463=bc327 and 2455=47mfx25v
PHILIPS 20CN4465: AO LIGAR APARECE A INDICAçãO F1 NO DISPLAY.
When switching on, the indication f1 appears on the display. Check inside the remote control sensor shield and replace the c-093- 100mf capacitor. Don't forget to replace the shield.
PHILIPS 14GL1314
Black screen with white stripes flashing no image and no audio R3963 10k aberto.
PHILIPS 14GL1014
Kills tension +b Zd 6737 shorted.
PHILIPS 14GL1314
Does not tune channels R3958 18k aberto.
PHILIPS 20PT3336
Vertical closed 5 seconds line peaks and turns off R3448 open
PHILIPS 29PT6654
No Sound D 6536 shorted
PHILIPS 29PT4643
Closed at the top about 4 cm with shade just below C2465 10u/100v
PHILIPS 14PT110
No audio and image dark screen (with weak high voltage) Saida vertical tda 3653b
PHILIPS 14PT3131
Normal power supply device does not work Optical coupler
PHILIPS 20GL1045
Image to the right without characters Zd6506 12v
PHILIPS 29PT5942
Power supply does not work voltage only on the fet drain Optical coupler
PHILIPS 21PT5342
Optical coupler
PHILIPS 14GL1314
Does not tune channels R3958 18k aberto
PHILIPS FWC380/19
One channel with no sound and the other with a loud noise (bang) Exchange c2601, c2602, c2641, c2642 and r3513 and r3514 from 3k3 to 1k2 and go for the hug.
PHILIPS 29PT4631 -L01.1L
L01.1L
TV triggering the degaussing relay (degaussing coil) directly Zener diode with the wrong zener voltage value, it came from another workshop with a 5v1 one instead of 6v2 which is correct. It's soft! It is the 6540 diode, the circuit behind the photo-coupler.
PHILIPS DVP-3005
No audio Ce8 spacious.
PHILIPS 20PT3331
No sound in rf Open 4n7 smd 2201
PHILIPS 20GX1659 /78R
GR6-AL
Vertical deformed compressed parts Vertical closes at the bottom after heating, check deflector unit.