Search: philips
Results: 14206
Make Model Symptom Problem Solution By
PHILIPS VR3522
No sound. (with or without image for TV, VCR). CN4 connector with poor contact.
PHILIPS VR3522
Without horizontal synchronization. X401,c403,c405
PHILIPS VR3522
Noisy playback Dirty head
PHILIPS VR3522
There are no colors Lpf2, c65, c79, c84, c85,x 801, ic81, r869, ic86. preampl.= q204 e c209. medir tp206. * 30jul96 acm *. video unit = c74, c65, c79, r53. medir pb fm color, pino 41 de ic1. * 30jul96 acm *
PHILIPS VR3522
Does not reproduce in SP C731, c730, ic701 and cylinder. obs. check envelope in head preampl output. * 30Jul96 acm *.
PHILIPS VR3522
Does not play in slp C717,c718, ic701 or cylinder. Note: see FM pulse on the output of the head amplifier. * 30Jul96 acm *.
PHILIPS VR3522
Does not recognize slp speed (low ctl) See, c419, c421, r424, ctl head, measure pin 26 of ic401. * 30Jul96 acm *.
PHILIPS VR3522
Does not spin tape. X401
PHILIPS VR3522
It doesn't work (it stays off). D7 pci (foto). ** . resistor r04. * jun 95 mjs *. ver r3, r4, c13, r26 e r27. * 30jul96 acm *.
PHILIPS VR3522
No characters/menu appear. Ic36. jdn.
PHILIPS VR3522
Does not erase tape See: c304, c305, q301. measure pin 1 of ic301 at rec 10.2v and 70khz. * 30Jul96 acm *.
PHILIPS VR3522
Upper or lower noise range (-). There is random switching of the heads, motor drum (upper cylinder). *Nov 94 es*.
PHILIPS VR3522
Tangles or chews the tape. See ps62 mode key. * 30Jul96 acm *.
PHILIPS VR3522
It ejects the tape by itself and sometimes turns it off. Ic601 and cp601 open, there is no recognition of the presence of tape set 94 ab.
PHILIPS VR3522
Dos/menu - with changed characters. Leak on the printed circuit below the cn802 ink. * Jan 95 acm *.
PHILIPS VR3522
Display so indica --:-- D605
PHILIPS VR3522
Turns off by itself. Foto sensor ps1. * 26fev96 jo *.
PHILIPS VR3522
Turns off when advancing or advances and turns off. Check cp601 open. * 15set97 ctr *.
PHILIPS VR3522
Flashing color Video unit= 84, 85. medir pino 42 is hch (h,shv). * July 30, 1996 acm *.
PHILIPS VR3522
Commands do not act after stop. Verificar resistor 628 (chip 150k). * out 94 es *.