Philips Repair Tips
Search: philips
Results: 14243
Results: 14243
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
L9-SS
|
Turns off after some time of use. | Check integrated 7250 (tda8841 code 4806 209 87842), The device goes to standby after 10 seconds. * 22Feb2000 acm * check diode 6343 (bzx284c8v2 code 4806 130 97041, it remains on the trc panel), probable alteration, causing activation e.g. | ||
PHILIPS |
L9-SS
|
Turns off when connecting antenna. | Check integrated 7520. * 02jan2001 geraldo ms339 *. | ||
PHILIPS |
L9-SS
|
Damage IC or TS semiconductor | 7518, check: 2508, 2517, 2518 and 3517. * 02jan2001 jose ba350*. | ||
PHILIPS |
L9-SS
|
Commands act partially or hotel mode | To disable hotel mode, activate: on channel 38 volume (+) and () on the front panel, and at the same time the key cr osd for approximately 5 seconds. * 22Feb2000 anc *. | ||
PHILIPS |
L9-SS
|
Acts intermittently via the remote. | Check welding of the remote terminals, see information reco1 for l9ss. * 13Oct00 anc *. | ||
PHILIPS |
L9-SS
|
Heats diode. | 6550 diode heats up after replacement, check 5545 traffic. * 02jan2001 hd *. | ||
PHILIPS |
L9-LS
|
Low or no sound in av. | Check eeprom programming. 04may01 sp463 evaldo *. | ||
PHILIPS |
L9-LS
|
So fica em stand by (power off). | Check 7401. 04mai01 sc603 *. | ||
PHILIPS |
L9-LS
|
No sound. (with or without image for TV, VCR). | Check eeprom, see option bit setting before replacement. * 02jan2001 evaldo sp463 *. | ||
PHILIPS |
L9-LS
|
It doesn't work (it stays off). | STBY LED is also off, check SMD 7604 transistor reset, if in doubt, replace it, as this component starts to work if heated. * 18may00 jpba sp355 *. STBY LED off, check diode 6600 and capacitor 2675 in short, in the circuit regulates | ||
PHILIPS |
L9-LS
|
Horizontal lines (bottom or top). | Check open capacitor 2409 (47uf). * 16Oct2000 astor rs147*. | ||
PHILIPS |
L9-LS
|
Return lines when calling. | Enter sdm mode and select option "as" "off". * 27set00 type * . | ||
PHILIPS |
L9-LS
|
LED(s) flashing. (repeatedly) | 1x, check resistor 3651. 04mai01 rn145 francisco *. | ||
PHILIPS |
L9-LS
|
Turns off immediately after turning on. | Verify 7833 and 7400. * 16Oct00 olive rs608 * . | ||
PHILIPS |
L9-LS
|
Turns off after some time of use. | Check vertical integrated. 04may01 sp463 evaldo *. | ||
PHILIPS |
L9-LS
|
Damage IC or TS semiconductor | Vertical integrated circuit resistors 3401, 3402, 3405: Check the possibility of a shorted deflector. * 16oct00 mjs sp355 * . fet 7518, check open resistor 3525. * 02jan2001 hd *. vertical ic, checks diode 6403. 04may01 rj310 antonio | ||
PHILIPS |
L9-LS
|
Blocks during search/scan. | Check position 2002, if the value is 220uf replace for another of 100uf. * 28mar2001 st01/0016 *. iris c184 | ||
PHILIPS |
L9-LS
|
Blocked | Check transistor reset 7604, if in doubt replace, as it starts to work after heating. 18May00 jpba | ||
PHILIPS |
L9-LS
|
It beeps loudly (power supply), but it doesn't work. | Check zener diode 6514 (bzx55c18). * 08mai01 rj605 pp. | ||
PHILIPS |
L7L
|
Vertical deformed compressed parts | C 2403 shorted. vertical becomes uneven and the tension on the pin 7 of the ic7401 is at a high level. app. loses the osd too. * 31Jul98 sc374 * r 3407 amended or opened. use two resistors according to info |