Search: philips
Results: 14206
Make Model Symptom Problem Solution By
PHILIPS DC441
Distorted and saturated in fm. Smd 3208 resistor with cold soldering. * mar 95 lav *.
PHILIPS DC441
Display off Solderless 3901 resistor. * oct 95 esc *. 6700 zener diode, eeprom power supply. * 26Apr96 emm *.
PHILIPS DC441
Turns off immediately after turning on. Pin 2 without earth connection. * oct 95 esc *.
PHILIPS DC431
Low sound. Short between trails (junction 2610/6924). * mai 95 esc *. 7401 (low sound on one of the channels). * Jul 95 Esc *.
PHILIPS DC431
It only allows for little memorization. Adjust coil (am) 5111. * aug 95 esc *.
PHILIPS DC431
It doesn't work (it stays off). Cold solder input connector. * oct 95 esc *.
PHILIPS DC401
Accelerated speed Piece of tape wrapped around the capstan. * mai 95 esc *.
PHILIPS DC401
Low or no sound in the tape function. Integrated circuit 7501 (TA7784P). * mai 95 esc *.
PHILIPS DC401
Low sound or no sound in fm function. Capacitor com fuga 2202 (100nf smd). * mai 95 anc *.
PHILIPS DC401
Tuning I know manually. Adjust bonina 5200 (fm) and trimpot 3014. * ago 95 esc *.
PHILIPS DC401
No sound. (with or without image for TV, VCR). Check resistors 3804 and 3805. * apr 95 esc *. 7405 shorted. * Jul 95 Esc *.
PHILIPS DC401
Without tune. Capacitor 2410. * may 95 esc *.
PHILIPS DC401
Plays both sides simultaneously Falta de jump 9304. * nov 94 eag *.
PHILIPS DC401
Searches but cannot find (barr3/sint3). Leaky capacitor 2202 (100nf smd). May 95 anc *. am little gain, coil 5101 shorted. * Aug 95 Esc *.
PHILIPS DC401
Does not tune FM. Variable tuning voltage does not work check set oscillator circuit mainly for 2016/2012 capacitors. broken track at 3200/2205, voltage does not vary at 6004. * 20dec95 esc *.
PHILIPS DC401
Don't tune in am. 7401 decoder, the fm is noisy. * nov 94 eag *. 3200 trail open. * ami 95 esc *.
PHILIPS DC401
It doesn't work (it stays off). Integrated output appears to be shorted, check pin 2 of the integrated 7600 (tda1519), possible broken track. * mai 95 esc *. shorted transistor 7902. * mai 95 esc *. input socket with broken terminal. * mai 95 esc *.
PHILIPS DC401
Tape function does not work. Integrated microprocessor shorted on pin 15. * oct 95 emm*. shorted zener diode 6728. * out 95 emm *.
PHILIPS DC401
The radio function does not work. Micro 7720 with pins 15, 16 and 17 shorted. * Jul 95 Esc *.
PHILIPS DC401
Does not accept code Trail broken 3816f, lights stay on. * 20dec95 esc *