Search: samsung
Results: 3845
Make Model Symptom Problem Solution By
SAMSUNG CL29C650GQ
Vertical closing at the bottom, problem with the ew and no color Eeprom Manoel L. Silva
SAMSUNG CL29C650GQ
Burning horizontal output transistor D402 Manoel L. Silva
SAMSUNG CL21Z58MQ4-XXAZ
Expanded image and heats horizontal output transistor C415 of 100nf/400v and cr406s of 300nf/400v, from the horizontal circuit close to the fet Manoel L. Silva
SAMSUNG CL21Z58MQ
Dark screen Ceramic capacitor on non-cinescopic plate Manoel L. Silva
SAMSUNG CL21Z58MQ
Does not leave. there is 270v on pin 1 of the power supply IC, on pin 3 there is only 5v. D803 27v Manoel L. Silva
SAMSUNG CL21Z58MQ
There is only 270v on pin 1 of the power supply IC, on pin 3 there is only 5v. the power supply does not start. D803 27v Manoel L. Silva
SAMSUNG CL21Z50MQXXXAZ
Closed frame at the bottom Ic803 8v regulator Manoel L. Silva
SAMSUNG CL21Z50MQ4XXAZ
Turns on and off and there is a strong buzzing noise from the speakers. C821 (100/160v) and c822 (220/160v), 1k r820 on the power supply and the l808 coil, 5v zener on the varicap line Manoel L. Silva
SAMSUNG CL21Z50MQ4XXAZ
Doesn't start. no tension in secondary school. Voltage regulator cq0765rt. placed the 5q0765rt. Manoel L. Silva
SAMSUNG CL21Z50MQ
Dead Ic 801. Manoel L. Silva
SAMSUNG CL21Z50MQ
Inoperative, not even the stand-by LED would light up. Power supply ci str (cq0765rt) broken. Manoel L. Silva
SAMSUNG CL21Z50MQ
Inoperative. Not even the stand-by LED lit up. Power supply ci str broken. Manoel L. Silva
SAMSUNG CL21Z50
No image R270/10k open. goes to pin 30 (vprot) of the micronas Manoel L. Silva
SAMSUNG CL21Z43MQ4
Ew doesn't work. cushion effect image. Open 62k r411 Manoel L. Silva
SAMSUNG CL21Z43MQ
It turned off after +or- 5 minutes of operation, the power supply overheated and turned off. C803 de 220µf/400v +b primario. Manoel L. Silva
SAMSUNG CL21Z43MQ
Interference in the image Ic803 78r08 even turning off the TV or the screen would darken almost completely. Manoel L. Silva
SAMSUNG CL21Z43MQ
Voltage only on pin 1 of ic 801 Dz803 shorted. Manoel L. Silva
SAMSUNG CL21Z43MQ
When turned on, the image appears reddish. A fraction of a second is normal, but with the red it comes and goes. Enter service mode and change the akb option from 1 to 0 Manoel L. Silva
SAMSUNG CL21Z43MQ
Didn't care Shorted deflector. external yock wire shorted to horizontal and vertical Manoel L. Silva
SAMSUNG CL21Z43MQ
Doesn't start Ic801 ci pwm of the power supply defective. Manoel L. Silva