☰

Samsung Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: samsung
Results: 3802
Make Model Symptom Problem Solution By
SAMSUNG CL21M6MQ
Retrace lines, screen sometimes white, blue or red. turning off afterwards or not Faulty rgb circuit Replace tda 6107 This email address is being protected from spambots. You need JavaScript enabled to view it.
SAMSUNG 540N
GH15LS 		Doesn't start C115 1000/10v exhausted Just replace the said one and it's beautiful (also note the capacitors nearby) willian Amigo
SAMSUNG WS-32Z 46V
K55A 		Without sound, but with video Ic601 (msp3411g b11), d601 e d605 (z 5,6v), cristal x601 joaquim cunha
SAMSUNG WS-32Z46V
K-55A 		Starter won't start, noisy sound Ic-601 (msp 3411g b11 joaquim cunha
SAMSUNG CW-21Z413N
Image at the top of the screen Eprom data loss Replace eprom 24c16 and proceed to geometry settings Tuga_75
SAMSUNG CN-3355Z
Retraction lines across the entire screen D499 measured low d in4148 Help yourself leave your tip ass. arni ELETRONICA @RNI - L. LEAL
SAMSUNG PS-42E7S
D74A 		Dead power supply Db864 diode RAIMBER
SAMSUNG LCD LN40R71BAX
Tv without picture Power supply capacitors 2x1000-16v, 2x2200-16v ARASONIC
SAMSUNG CB20H42T
KS1A 		Tries to start but turns off, no mat In power supply d805 (+125v b+) shorted Good power supply fuse joaquim cunha
SAMSUNG CN-5066VB
TV doesn't just start on stand by, when it turns on the LED blinks a few times and goes out and nothing Ci 301 of the vertical (tda 8356) broken, after the change the TV started but had colored lines in the middle of the screen, I realized that the 45v voltage was low so I changed the r 410 Replace the vertical ci and r 410 that comes out of the 45v line of the fly back GEORGE PONTES
SAMSUNG DVDP-370
Drawer doesn't open Missing 5 vdc pin 8 of the driver Broken print Roberto Consertos
SAMSUNG MM-L2
Doesn't read CD, won't focus Leisure unit potentiometer out of adjustment, adjust the potentiometer to 0.75 (75%) of the maximum value of the resistance of said potentiometer and turn on the unit to see if it can read the CD or not, if it does not, replace the leisure unit (code soh-aau ) Adjust the laser potentiometer and clean the focusing lens of said unit, if it doesn't work replace the unit with a new one Joãombs
SAMSUNG 29M21MQ
Only staby light when turned on goes into protection and returns to staby PCI connections BRUSKE
SAMSUNG CL29Z50MQ
TV turns on but after 10 seconds it turns off C 803 empty mauricio
SAMSUNG CN-3383V
Turning off by itself Replace c305 This email address is being protected from spambots. You need JavaScript enabled to view it.
SAMSUNG CL-21M6MQ
When the TV was turned on, the +b of the flayback had 178v, the power supply was unregulated R831 of 123k . measuring 154k and just change it and that's it This email address is being protected from spambots. You need JavaScript enabled to view it.
SAMSUNG CV 3383 V
Retrace line at the top of the screen C307 (100-50v) ao do saida vertical welljackson
SAMSUNG 551V S
Reduced horizontal width. set to 100% does not open fully. C419 de 2,2nf/1600v Also check d409 and c420 WF Eletronica
SAMSUNG CL-29K40MQ
With sound, without video and without OSD Zd903 with leak Zener de 5,6vts This email address is being protected from spambots. You need JavaScript enabled to view it.
SAMSUNG CN5048V
KCT12A 		Uncontrolled vrt/horz timings C246(2.2/50v) connected to pin 53(cag) of ci 201(tda8374a) Replaced the c246 ok Clayton