Sharp Repair Tips
Search: sharp
Results: 1784
Results: 1784
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SHARP |
CS CHASSIS
|
Audio whistle | Damaged print feeding 40v to r368 | ||
| SHARP |
CS CHASSIS
|
Accessing service mode | Press vol down & ch. up when powering up then store withstandby button. | ||
| SHARP |
CS 66CS-03H
|
Field cramp at top | C512 22µ 50v | ||
| SHARP |
CS 59CS05H
|
Dead | Ic201 tda8375a if/vid chip faulty | ||
| SHARP |
CS 59/66CS03H
|
Trips, no pic or sound, but bright light on top of screen with random colours | Q707 bc338 o/c in "all time" 5v supply | ||
| SHARP |
CS 59/66CS03H
|
Stuck in stby | Q704 bc338 o/s | ||
| SHARP |
CS 59/66CS03H
|
Sound ok, no pic. flyback lines visible if a1 turned up. | R640 180r fusible s/c (rrxz227bmzz) | ||
| SHARP |
CS 59/66CS03H
|
Slow to come on | C712 220uf 25v | ||
| SHARP |
CS 59/66CS03H
|
Slow start from cold, nicam led is on | C714 1000uf 10v 105degree | ||
| SHARP |
CS 59/66CS03H
|
Poor focus (looks like crt faulty) | R618 22k gone high | ||
| SHARP |
CS 59/66CS03H
|
No teletext | No video on pin 10 ic401 due to q451 2sa1037 and q901 2sc2412 leaky. | ||
| SHARP |
CS 59/66CS03H
|
No sound, pic ok | Sound muted by q314, q313, q315 not getting +40v supply from line stage, r643 5.6r o/s. these components are not market on cct, instead refer to cct of 51cs03h | ||
| SHARP |
CS 59/66CS03H
|
No response to remote or front buttons | D1101 (rhex0545bmzz) s/c, no supply to pin 1 ic1010 | ||
| SHARP |
CS 59/66CS03H
|
No pic, no sound, set tripping | R628 getting hot, 45v supply down to under 10v due to q704 bc338 s/c (+5v standby and sound supply) | ||
| SHARP |
CS 59/66CS03H
|
No line drive, red and green leds on, all secondary volts ok | R740 330k 0.25w o/c (no volts on pin 15 ic1010) | ||
| SHARP |
CS 59/66CS03H
|
Int. dead, loptr runs hot and blows after a few days | Poor connection on scan plug on scan coil (not pushed fully to locked position) | ||
| SHARP |
CS 59/66CS03H
|
Frame collapse | No 5v supply, replace q707 bc337 and r643 5r6 0.5w | ||
| SHARP |
CS 59/66CS03H
|
Field bounce and then field roll on text only | C604 330uf 10v | ||
| SHARP |
CS 59/66CS03H
|
Dead, no green led, only neon | Audio stage s/c shorting +16v and -16v rails. replace d305, d306, d307, d308, q305, q306, q311, q312 | ||
| SHARP |
CS 59/66CS03H
|
Dead, loptr s/c | Replace loptr buh515, r604 39r (burnt), c606 680nf 250v (leaky) |