Repair Tips
Search:
Results: 88013
Results: 88013
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| HISENSE |
LED42K16P RSAG7.820.4158
|
Does not turn on, no voltage at the power supply output. | Check if l6 is open or the 1.2v circuit components | Andreas | |
| HISENSE |
LED32K300 RSAG7.820.4801
MST6M182VG |
When turned on, the image does not appear or when it is working, the image disappears. Both symptoms are intermittent and do not always appear. | Check n18(ao4459) | Andreas | |
| HISENSE |
LED42K100N RSAG7.820.4801
|
Turns off and freezes intermittently | Verificar ic n21 (apx810-29sag-7) | Andreas | |
| HISENSE |
LED40K360X3D RSAG7.820.5060
MT5505 |
Does not start, indicator LED is on | Voltages at the power supply o'que. check ic no 22 (tp 5482) | Andreas | |
| HISENSE |
LED32H130 RSAG7.820.4801
MST6M182VG |
When you try to tune in, it says "no signal" | Check v37 & v38 mosfets e c206 (1µf/16v) | Andreas | |
| HISENSE |
LED32K01 RSAG7.820.2242 RSAG7.820.4359
MST6M48 |
No image or abnormal image | Check n14 (ao3401) | Andreas | |
| HAIER |
LE32S3500H
T.MS6N181.6A |
When turning on "no signal" when in RF input. AV and HDMI work without problems | Check r320, r322, r324 | Andreas | |
| HAIER |
LE32B90
|
No display. backlight working | Check x7ga 1h mosfet (can be replaced with ao3401) | Andreas | |
| CHANGHONG |
LED42B2000I
ZLM38 |
Turns on and freezes when the logo appears | Update bootloader firmware | Andreas | |
| SAMSUNG |
29K40
|
Turns on and off | Resistor 169 39k auterated | JR Alagoinhas BA tec | |
| TOSHIBA |
TV 2159 NFSU18
|
I'm a year old | Q906 on the tube plate and just remove it | Silvano | |
| SAMSUNG |
CL29A551GQ
|
It doesn't turn on, I press the on button and the LED doesn't go off | Change all the keys, escape them | Dj pituka | |
| LG |
21FU1RK
MC-059C |
Cushion effect with excess width | Ic401 toasted pin 4 gnd shorted to pin 5 out / ic reference: tda8145 | Replace | GS OLÍVEIRA |
| PHILIPS |
FWM663X/78
|
Does not turn on, just stand by | L1 open corroded by glue. | Clean the glue from the entire board, remove the coil and resolder the corroded terminals, no need to replace | |
| AOC |
LC32D1320
|
Turns on normally, has sound and backlight on without characters or image. | It was verified on the v-con board that the fuse was open and the capacitors c104,c101 were shorted. | The capacitors and fuse were replaced. | JC Eletrônica Cícero |
| PHILIPS |
42PFL3604/78
|
Does not turn on, standby on. | Exhausted solid capacitors. | Substituir c474,c106, c526,c529. | 2D Eletrônica e Refrigeração. |
| MULTILASER |
TL017
ML-EL02 |
TV turning on and off. turns on, shows the multilaser logo and turns off | Capacitor position se1 shorted - electrolytic 100mf/63v | George Luís | |
| TCL |
43S6500
|
Stuck on the initialization ball and won't turn on. | Corrupted system. update via pendrive by holding power button.https://eletronicabr.com/files/file/42641-atualiza%c3%a7%c3%a3o-tcl-43s6500/ | Portal Tec - Catalão - Junior | |
| PHILIPS |
32PFL3707D/78
32PFL3707D |
Turns off by itself, emits a beep, turns off the screen, drizzles, 3.3v regulator with 4v | Metallic capacitor c9111 and 3v3 regulator u701 | JOHNATAN | |
| SEMP |
LCD LED
49SK6000 |
Just gets a blue screen | I don't know | Japi José dos Santos |