Repair Tips
Search:
Results: 88089
Results: 88089
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SOM AIWA |
CX-ZM2800HR
|
Does not turn on, display is off. | Fusistor in position r998 and r999 open, and damaged audio output stk-419-130 | Audio output, and fuses r998 and r999. | MARCONES DE ARARIPINA-PE |
| PANASONIC |
TC-39AS600B
?? |
Error when turning on, turns off automatically | Company that does not provide support, and makes products to be broken one day after the expiration date | Don't buy anything from Panasonic, it's the best thing to do. | Rava |
| PHILCO |
PH40E36DSGW
|
Heats up turns off | Leak in the 1mf smd c111 capacitor - just change it | It is next to d5, next to q8, between the micro and the screen's flat cable | SANTOMEL |
| SONY |
KDL40R485
|
Turns on works normally and turns off randomly and turns on again. | Leak in on and off switch | The ideal would be to replace the key plate but as I couldn't find it, I dismantled and cleaned the on/off switch. | José Dias |
| H BUSTER |
HBTV-32D05HD
|
TV does not tune HD channels and the input function does not work either | Factory data unconfigured | Remote control: menu + 8893 go to clear eeprom and press ok and after reset and press ok. Turn off for a few seconds and turn on the TV. | leitemarcellus |
| LG |
CJ 87,CJ 88
EAX671732201 |
Cd drawer opening | Replace r 505 and 506 for 2 470 r smd | ELETRONICA SOARES BH | |
| PHILIPS |
55PFG7309
|
Turns on, off, screen does not light up and tsound is no sound and 12v power supply remains at 9v | Shorted or open q9332(w2a (pmst3906) put in place bc857) | SANTOMEL | |
| TV SAMSUNG |
UN32FH4003G
|
No image, normal audio. | Burnt out led (backlight) | Replace the LEDs and reduce their current - in the LED drive, replace the resistor (r9113) of 2r2, replace it with 3r3 - 3w | Marco Gasparatto |
| SOM LG |
CM4430
|
Does not turn on, secondary power supply is reset! | Diode d904 measured as good, but it was not conducting. | Replace d904 (rl104f) I put one (fr155) in its place and it worked perfectly. | MARCONES DE ARARIPINA-PE |
| SAMSUNG |
UN32FH4003G
|
Reduction of backlight LED current | Replace the resistor (r9113) with 2r2 and replace it with 3r3. | Marco A Gasparatto | |
| MICROSOFT |
XBOX 360
SLIM |
Does not turn on, green LED does not light up | Corrupted or shorted nand | Replace the nand or rewrite and read before changing. | david rayel |
| MICROSOFT |
XBOX 360
SLIM |
Does not turn on, green LED does not light up | Short on usb | Usb voltage regulator | david rayel |
| MICROSOFT |
XBOX 360
SLIM |
Does not turn on, green LED does not light up | Shorted chipset. overheating | Replace | david rayel |
| MICROSOFT |
XBOX 360
SLIM |
Does not turn on, green LED does not light up | Hanna | Hanna in short super heating. | david rayel |
| MICROSOFT |
XBOX 360
SLIM |
Does not turn on, green LED does not light up | Standby voltage regulators | david rayel | |
| SONY |
52EX705 40EX705 46EX705
|
TV flashes the Sony logo, turns off and flashes 6 times | Blown ps6800 smd fuse (below the LED bar connector, looks like a resistor) | I replaced the fuse with a 0Ω smd resistor and it solved the problem. | Darci Denzer |
| TOSHIBA |
2134
|
Auto buzzing at the power supply. everything good, almost everything, in truth. | Capacitor de 47 160v | The capacimeter was good, as it showed 49μF. I replaced it and the power supply was silenced. | |
| LG |
42LM6200
|
Turns on after a few seconds, the backlight goes out, and the power supply blinks 4x. | 2 LEDs burned out on the LED strip. | Replace the complete LED strip. | Antoni Garcez |
| CCE |
HPS 1403
|
Turns on standby, when the LED turns off but it doesn't turn on +b ok | I'm sorry | Replace the bc337 even if it's good | |
| SAMSUNG |
LN40C530
|
TV turning off by itself and sometimes with a black background blurred with red | I resoldered the power supply, checked the electrolytics, washed the board with teener, but it didn't solve the problem. | I saw sticky oil on the signal plate above and below the plate, I removed the square wafer of thermally conductive silicone rubber, I washed the entire plate, I cleaned it well, I dried it with a hairdryer, I adapted it with insulation in its place, the aluminum heatsink with thermal paste, I glued it only to the corners of the insulation and the heatsink, the problem is gone | Tulio Moreira |