Repair Tips
Search:
Results: 88093
Results: 88093
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
TV 2118USP/AV
|
Turns on flashes direct led with image turning on and off directly with no functions, nothing operates, not even by remote control | Change all the ringtone keys and run to dim dim | eletronica publison natal rgn | |
| LG |
43LF5100
|
No image or bluish image | Defect in the LED bars. | Replace led bars. The originals are no longer supplied by LG. However, the rules of the 43lj5500 can be adapted and it is very simple code: agm76149801 | rafaelmoraes99 |
| SEMP TOSHIBA |
40L2400
|
TV turns on normally after a while and turns off. | Altered 3.3 regulator. | Swap n805 | Eletrônica Ideal |
| SAMSUNG |
CL21C650ML
KSCB |
Missing vertical top i bottom image in the middle | Bobina vertical | Coil replace | Cicero costa |
| SEMP |
2934
SK91 |
Connects with the weak image as if it were the image tube. I changed the tube but it wasn't the image tube! | L301 | Replace the l301 790μH coil without measuring and just run for a hug! | Sinailson furtado |
| SEMP |
2934
SK91 |
Connects with the weak image as if it were the image tube. I changed the tube but it wasn't the image tube! | L301 | Replace the l301 coil without measuring and just run for a hug! | Sinailson furtado |
| BUSTER |
HBTV-32L07HD
|
It doesn't turn on, it just stays on stand-by | Q852 power supply | Leaky transistor q852 replace | Alek |
| BUSTER |
HBTV-32L0THD
|
It doesn't turn on, it just stays on stand-by | Q852 power supply | Leaky transistor q852 replace | Alek |
| SEMP |
TV2134
SK11 |
Sound goes back and forth, increases and decreases | C636 | C636 exhausted by another is good again | Marqueis eltec eletrônico |
| SAMSUNG |
LS17PEASF
732N PLUS |
Turns on and then turns off. | Prolonged use | 820μF/25v capacitors at the power supply are bad, replace. | JET |
| SEMP TOSHIBA |
DL3254(A)W
|
Back light on, but no image | Capacitor incurto | Replace cp17 | Eletrônica Ideal |
| PANASONIC |
TC - L42E5BG
|
Standby LED off, killing 5v, sometimes turns on normally | SMD capacitor shorted on remote sensor board, capacitor that goes on the sensor leg | Capacitor replaced for the same value | Eletrônica Possamai |
| TOSHIBA |
U13
|
No video on av | Swap memory | Swap memory | FRANCISCOFERREIRA |
| LG |
26LG30R
EAX40043811 |
Turns on, but no image (with backlight) | Q1101 (4925b) burned. I changed it and it started working again. | Just replace the q1101 close to the lvds connector. It can happen that the tcon burns out when this chip burns out. | Darci Denzer |
| SAMSUNG |
UN58H5203AG
|
Just turn it on with the button but the remote control doesn't work | Capacitor c1 on the IR plate shorted | Just remove it | ACELETRONICA |
| SAMSUNG |
LN32C350D1M
|
LED blinks but nothing turns on | C810 with leak | C810 with leak at the bottom signal board next to reg 5vts ic803 | presto |
| LG |
32LV300C
|
Power supply does not turn on | Fb9101 c9118 e zd9108=16v | Replace and go to another | Gilvan Gregorio |
| LG |
RP-21FB32
SC 023A |
Locked on channel 3; locked keys; voltages ok | Eeprom | Rewrite eeprom memory | Fabio SOS ELETRÔNIOS@ |
| SAMSUNG |
LN40M81BX/XAZ
|
The lamps do not turn on, that is, the backlight does not come on | Ti-8025 open, impact oscillation so inverter. | Barter it | Alex Lopes <small> |
| AOC |
LE22H138
|
The standby LED (orange) lights up. When turned on, the blue LED lights up for one second and returns to standby. | Capacitor c9101 da power supply (470uf x 10v). | I recommend exchanging without measuring, as in my case the value was within tolerance. | Flavio |