Repair Tips
Search:
Results: 88135
Results: 88135
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SAMSUNG |
BN44-00116A BN44-00116B
SMPS |
Smps power supply failure. capacitor failure | C111, c112 (820µf/25v 105ºc), c109, c110(1000µ 20% 10v), c113 (330µ/10v 105ºc) c117 (330µ/25v 20%) | Pablo | |
| SAMSUNG |
BN44-00089A
SMPS |
Smps power supply failure. capacitor failure | C111, c112 (820µf/25v 105ºc), c109, c110(1000µ 20% 10v), c113 (330µ/10v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00098A
SMPS |
Smps power supply failure. capacitor failure | C111, c112 (680µf/25v 20% 105ºc), c113, c114(1000µ 20% 10v), c115 (330µ/10v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00182E
SMPS |
Smps power supply failure. capacitor failure | C113, c116, c115 (1000µf/10v 20%), c119(330µ/10v 105ºc), c112, c108 (820µ/25v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00124Q
SMPS |
Smps power supply failure. capacitor failure | C109, c110 (1000µf/10v 20%), c111(330µ/10v 105ºc), c112, c113 (820µ/25v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00124L
SMPS |
Smps power supply failure. capacitor failure | C109, c110 (1000µf/10v 20%), c111(330µ/10v 105ºc), c112, c113 (820µ/25v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00124M
SMPS |
Smps power supply failure. capacitor failure | C109, c110 (1000µf/10v 20%), c111(330µ/10v 105ºc), c112, c113 (820µ/25v 105ºc) | Pablo | |
| NOBLEX |
LT42DR935 42LD850FI LCE42IF12 PLD4223FI
|
When you want to turn on the LED TV it doesn't turn on and goes to stby. | In the event that the failure is a data issue, the firmware update must be performed first to version v0000.01.01a and then loaded with version v0000.01.02a; In this case, it is enabled for online updating. | In the event that the failure is a data issue, the firmware update must be performed first to version v0000.01.01a and then loaded with version v0000.01.02a; In this case, it is enabled for online updating. The latter must be carried out as indicated in the “firmware update” instructions uploaded to the corresponding models. reali1) enter the corresponding model on page. from cyberservice and download the firmware files 01_01a and 01_02a (compressed): a) firmware 01_01a / 01_02a. b) save. c) unzip the file. d) tsound will be 2 folders left, unzip the files until the .bin file remains: usbupgrade. | Pablo |
| PHILIPS |
29PT4640/78
|
The TV turns on and then turns off, when the image appears, tsound is a flicker on the side of the image and turns off. | Cause capacitor c2455=47uf for 25 volts, with low capacity. Just change and celebrate. | Armando de Olímpia | |
| CCE |
TV2118USP
|
Red image with retrace lines | After many tests I discovered a defect in the image tube | Replace the tube and run to the hug | Eduardo Santos |
| SEMP |
32LV700WDA
|
LED blinker turns on not working | Without +5 at the output of ic 921 causes capacitor c9211 to leak | ON-PLAY ELETRONICA | |
| SEMP TOSHIBA |
LC4245W
|
When plugging it into a socket, the green LED lights up straight away and does nothing else, it doesn't turn on, it doesn't activate the PFC | Mainboard, 3v3 on eeprom low, around 1.67v | Corresponding regulator, just replace it. | davi.sls |
| SEMP |
2134(C)SL
|
Power supply does not stabilize, rises and falls 120 135 varying | Ceramic capacitor with leakage c204 c224 100nf check the rest of the capacitors | Replace | Dj Velk |
| PHILIPS |
FWM6500
|
Does not turn on, just standby lights blinking | Lack of 5v usb m601 does not pass 5v | I made an m601 jumper and 5v turned it on | beto2828 |
| PHILIPS |
FWM6500
|
Reset as | Perform the reset, with the network cable disconnected, press and hold the aux.game + title+ keys. then turn on the device. The message s-v27 will appear on the display. press the album key |>| ; turn on the device; The message grid10 will appear on the display. | beto2828 | |
| MITSUBISHI |
TC 2018-PS
|
TV arrived stopped, the owner already said that it was turning off quickly and went into protection, it remained in stanby | 33 v9lts diode shorted d 102 | <small> |
|
| AOC |
L32W831
|
Turns off after some time | It was noticed when it was working and voltage of 3.3 v in q 504 was above 4 v | With the replacement of the regulator the problem was resolved. | Miratec Eletrônica |
| SEMP TOSHIBA |
XB1551/DVD
|
Low sound | -12v missing in ci smd 4558 power supply defect r46 open 410r | Dj Velk | |
| BRITÂNIA |
FAMA 2 USB
|
Home theater britania fame 2 power supply with hissing, display becoming weak and transistors overheating | Home theater britania fame 2 power supply with hiss, display becoming weak and transistors overheating (resolved) defect was the 47mf x 50v capacitor e11 close to the tl494. | Replace the capacitor and run to the hug | SILNEI |
| PANASONIC |
TC-14RM10L
|
Image shaking after a few hours on | D810 ars150 or b0eakt000018 leaks after it heats up. | Replace d810. In my case, I put a byw95c in its place. recommendation from a friend, Zezinho, of Araripina telesom electronics. | MARCONES DE ARARIPINA PE. |