Repair Tips
Search:
Results: 88149
Results: 88149
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS-2092
|
With image only in av. | 33v zener diode. in position ic101. it is shaped like a transistor. reference upc574. | Replace ic101 upc574. | MARCONES DE ARARIPINA-PE |
| LG |
CM4330 EAX64991501
|
Sometimes it turns on, sometimes it doesn't. | 6v2 zener diode, position zd902 and 6.8nano polyester capacitor position c908, changed. | Swap 6v2 for 8v2/1w and 6.8nano for 10n/50v and that's it... | LUCIANO ALQUEJA |
| LG |
42LG50D
|
Doesn't start | Fet q601 with leak, fb601 open, tv already turned on, but pfc wouldn't bend, ci u601 defective. | Replace these parts and the TV was ok | Maurilio |
| SEMP TOSHIBA |
LC3246WDA AA110011
|
No image with sound | Cp45 and pc46 from fp1 | Replace of the same | José Clécio |
| PHILIPS |
32PFL3604
|
Turns on, screen flashes and lights go out, sometimes it works normally | Ch1 ch2 cracked | INTERTEC ELETRONICA | |
| CCE |
HPS-2092
|
League but tsound is no image just the green screen with horizontal lines | Fr914 22r fusistor open on tube plate | Replace fr914 on tube plate | MARCONES DE ARARIPINA-PE |
| AOC |
LC32D1320
|
TV turns on, shows the brand logo. tsound is no image, no sound and the display is off, the base light is working | Initialization failure, and just update the software and run for the hug! | Software update | CENTER SOM |
| PHILIPS |
20PT3336 78
SL0611 |
TV with vertical closed at the bottom | Change 24c16wp memory you have to have wp you can take it from another chasi | jair jj eletronica dorense | |
| CCE |
TV2118USP
|
By changing the power supply, when I increase the volume, the image shakes sides. | Put the missing r813 that comes as a factory option, just put one of 015 and the power supply stabilizes. | 13. | Lopestv |
| ELSYS |
ETRS35
|
Does not turn on, short LED off when turning on the asymmetric power supply | C181 with leak | Replace the capacitor with another of the same size | Gsaeletronica granja califonia |
| PHILCO |
PH21MGSS
|
Image with stripes | Changing the vertical IC and resistor r306 270r | MARCONES DE ARARIPINA-PE | |
| PHILCO |
PH21MGSS
|
Image with stripes | Changing the vertical IC and resistor r306 100r | MARCONES DE ARARIPINA-PE | |
| GRADIENTE |
D461
|
Stand | Replace of power supply capacitors: 16v/2200uf, 16v/330uf | JoaoPedro | |
| LG |
21FU4RL
|
Power supply low TV does not oscillate secondary 85v | R844 of 4k7 measuring 6k2 | Replace 844 4k7 | JUNIOR |
| SEMP |
TV2159NFS
U18 |
Vertical with lines of retractions at the top as if the capacitor was depleted after testing all the capacitors, none were found to be damaged | ??????? | The value of r306 was replaced from 82k to 33k and we just ran for the hug. | EDIVAN ELETRÔNICA |
| LG |
MCT704
|
So no standby (relogio), sem audio | It only arrived on standby, it was a CD2 touch key, then it turned on normally but tsound was no audio | I tried everything to solve the audio problem but without success, tsound was no =65v or -65v for sound output, the only solution was to place a 33k resistor between pins 3 and 4 of the pc901 photocoupler and another on the pc902, the voltages returned +65v and -65v and sound working normally, it was the only way... | Gleyton |
| SEMP |
DL4844
|
Back light turning off | R766 ref.512 | Put 15k follow the tip from my colleague avn perfect | Demétrio carlos |
| PHILCO |
PH32E53G
|
Inverted negative image after changing the main board | Configure fitury project data | With the TV on, type 062598 menu 013 after typing the TV turns off by itself when you turn it back on, everything will be ok | charlotniu |
| SEMP |
TV2134(C)SL
|
TV works normally but after forty minutes to one hour the image appears duplicated and jagged | Change without testing c302 and c303 56 and 180k/400v | jr_TEC | |
| SEMP |
TV2134(C)SL
|
LED lights up, turns on but turns off again and stays in this cycle | Q606 with changed hfe | jr_TEC |