Repair Tips
Search:
Results: 88172
Results: 88172
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
32PF3320
LC4.5 |
An "f" appears on the screen. the TV is in factory mode, | To exit, press both the "Volume" and "Program" "-" keys for approximately 5 seconds. | sim tv | |
| LG |
32LE2R-ZJ
LP61A |
Cr does not work. | Replace smd capacitor on ir receiver output | sim tv | |
| PHILIPS |
30PF9946/46
|
TV turning off the screen after 5 minutes with audio | Inverter board | sim tv | |
| PHILIPS |
29PT5642
|
It didn't work and the power supply output voltages were all at 0v. | T5531 of the auxiliary power supply with the winding wire corroded at the terminal | sim tv | |
| PHILIPS |
26PFL3404/78
|
Altered tone or inverted color | Check welding and dirt on the ic u4201 on the ssb panel | sim tv | |
| PHILIPS |
26PFL3404/78
|
Interference when connected to hdmi | Check welds on: r1501, r4404, rp4404, rp4406 | sim tv | |
| PHILIPS |
26PFL3404/78
|
One of the colors in cvi is missing or has an irregular color | Cold solder c1206 or r1203 | sim tv | |
| PHILIPS |
26PFL3404/78
|
Partially illuminated display | Possible leak in transformer t803, q801 and q802 - ipb | sim tv | |
| PHILIPS |
26PFL3404/78
|
Remote control does not work | Check welds fb02 (panel ir) and fb205 (panel ssb) | sim tv | |
| PHILIPS |
26PFL3404/78
|
One of the colors in cvi is missing or has an irregular color | Cold welding ci u4201 | sim tv | |
| PHILIPS |
26PFL3404
|
White screen and no image, but it had sound. | Bad contact on ci u1 of the t con board, and bad contact on the flat cables. | sim tv | |
| PHILIPS |
26PFL3404
|
Without image and with audio | Inverter power supply | sim tv | |
| PHILIPS |
26PFL3404
|
Vertical white streak on the screen | T-con board connector | sim tv | |
| PHILIPS |
26PFL3404
|
Does not turn on or intermittently turns off | Poor contact in the t803 solders | sim tv | |
| PHILIPS |
26PFL3404
|
It turned on, sound and image normal, after a minute on, it turned off. all normal voltages, pfc=390v | Ci ic901 tny277pn | sim tv | |
| PHILIPS |
26PFL3404
|
It turned on, and worked normally, but sometimes it turned off. without apparent cause | 5v supply varying, due to the high heating of the tny277pn ci | sim tv | |
| PHILIPS |
26PFL3404
|
Displays factory information. | It was in store mode. change to home mode. | sim tv | |
| PHILIPS |
26PFL3404
|
Turns off after approximately 4 minutes. | Ic901 tny277pn | sim tv | |
| PHILIPS |
26PFL3404
|
Back light does not come on | Inverter transformer | sim tv | |
| PHILIPS |
26PFL3403D/10
TCM2.0E LA |
Mains led comes on and goes off immediately (you hear the relay switch on) 5 v of power supply | Ic1- viper22a | sim tv |