☰

Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search:
Results: 88172
Make Model Symptom Problem Solution By
SONY KDL32BX325
TV doesn't turn on, totally dead. but the power supply has 5.3v from stand by Verified a short between gate and drain of u702 of 5.3v Replacing the hdmi u501 ci which was shorted. replace and go for the hug Ivan Bustamante
PIONEER MVH 88UB
Characters do not appear, keyboard lights only light up Botched q15 Replace q15 transistor s8550 Robson
PHILIPS 32PFL3404
Pisca led 3x Q3, behind the plate. Replace Joaomvjr
AOC LC42H053
Tsound is no 12v 24v, the TV turns on normally but when you unplug it and turn it on again, 12v 24v no longer appears Resolder 1m smd resistors position r935 r939 r944 Junior carioca
PHILIPS 32PFL5604/78
TV turns on, suddenly beeps loudly, freezes the image and restarts Ripple in tertiary feeding Electrolytic c474 on the main board with altered capacitance. don't test! to replace vapcomputadores
PHILIPS 21PT9467
3 colored line at the top of the screen C352 with low capacitance, replace Replace c352 100x50v orlando lott
SEMP TOSHIBA 2134
Non-vertical cold welding Solve Rafael
VESTEL 17MB51
17MB51 		Remote control is not detected at a distance of +/-15 meters Open the command and change the jumper from d2 to d1 Mário Martins
PHILIPS 20GL1340
No sound and no image, with a hiccuping noise when turning on Damaged flyback Replace flyback andre_pinda
ELSYS 2.0
No antenna signal Antenna cable core plug was inward Put the fitting back in place Receptor OI
SEMP TOSHIBA 32
Defective LEDs Change LED bar Works with any LG 42 TV LED Fernando
PYRAMID PB610SGX
When the protection is permanently activated, it does not disarm even by removing the protection ci Q212 with collector leak Tracing it was really good central eletronica
VESTEL 17MB26
17MB26 		I'm sound Insert resistor. of 10kω in position r26 Mário Martins
VESTEL 17MB26
17MB26 		Scart input does not give image Ic200 Check c296, c297, c302, r227 and r231 Mário Martins
VESTEL 17MB26
17MB26 		No image but with sound If the t-con power supply is normal, check ic603 and q803 Mário Martins
VESTEL 17MB26
17MB26 		Doesn't work Check r470, r471, c457, c613 and c615 Mário Martins
VESTEL 17MB29-3
17MB29-3 		Does not come out of standby Check c112 Replace c112 to 470µf/16 and c157, c158, c526, c533 and c536 from 100µf to 220µf Mário Martins
VESTEL 17MB35-2
17MB35-2 		Hdmi no image Reinstale software Mário Martins
VESTEL 17MB35-2
17MB35-2 		Image for (freezes) Change r478 and r499 to 47ω Mário Martins
VESTEL 17MB60
17MB60 		Usb ports don't work Check u149 and u145 Mário Martins