Cce Repair Tips
Search: cce
Results: 4815
Results: 4815
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
TODOS
|
Replaces tda9309 with 9302 | Replaces tda9309 with 9302 | Reverse pin 1 with pin 7 and run to the hug | Roberto Consertos |
| CCE |
HPS2003
|
Doesn't work | Standby LED turns on and off without the TV working | Replace q 802 | MARCOS ELETRONICA |
| CCE |
HPS 2997FS
|
LED is on but won't turn on | Q804 with escape killing 3v3 | francisco.s | |
| CCE |
HPS2918USP
|
Side strip with shadows | R.401 | julio itaguai | |
| CCE |
HPS2901
|
Does not turn on LED lights up when pressing the button turns on the LED turns off the relay hits and does not turn on, 130v voltage on +b oscillating the analog multimeter pointer | C826 - 100uf / 160 volts com terminal interno corroido | Replacing it solved the problem | washington de sousa |
| CCE |
HPS21AVP
H-2197A |
With side strip separating the screen | C418 330pf 2kv r414 18k | FERNANDO | |
| CCE |
HPS-1497
|
Left sidebar | Capacitor c417 open | Replaces | Alvaro (prolar) |
| CCE |
HPS-1471
|
LED does not turn on blinking low power supply 3v3 low is not the bc337 | Replace capacitor c805 150uf 400v seco | Replace c805 | beto2828 |
| CCE |
HPS1497-HPS1458
HPS14 |
Dead | Dz801(18v) shorted and d808 with anode loose above the solder | I can't access the service menu to improve the brightness, if anyone can, please post a way (in the service key it doesn't work) | ÁdrianChapadãodoCéu |
| CCE |
HPS1407
|
Frame dimensions varying in bright scenes, presenting noise in the audio. | Resistor r 215 (4.7 k) with changed value. | mickey27 | |
| CCE |
HPS21AVP
|
Width fluctuates as the image changes | C417 331k x2kv | Replace c417 | celito santo angelo |
| CCE |
TV2918USP
|
Turns on turns off alone no image no sound | C402 aberto | 330pf x 2kv coloquei 2 de 1k x 2kv | ELETRONICA MAURI JUNIOR |
| CCE |
TV2918USP
|
Black band on the left side with interference in the image when switching on and frame shifted to the right | C402 330pf 2kv | astae | |
| CCE |
HPS2171FS
|
Enter service mode | Ground r 781 on the other end of pin 1 of the ci (using a key and pressing several times until it enters | ||
| CCE |
HPS1471
|
Totally inoperative, not even the LED lights up | Dz801 18v | Replace | EletroClaudio Aguas Belas |
| CCE |
HPS2185FS
HPS2185FS |
If the sound increases, the image starts to shake | After changing the "tda1517", if the sound increases, the image starts to shake | "c831" problem solved.blzzz | neupsx4download |
| CCE |
HPS-2199FS
|
Doesn't start | Cap 825 47 uf x 160v e cap c829 33ufx160v | Replace-them | antonio dos santos lima |
| CCE |
HPS2981C
|
Vertical stretched | Height trimpot does not work. zener diode d301 10v open or faulty | Replace d301 with 10v zener | Diego PG-PR |
| CCE |
HPS 1423
|
Does not turn on, LED turns off when activated | Reference regulator ic802 (tl431 ra) inoperative | Replaced the tl431 ra, and turned it back on. | severo |
| CCE |
HPS 2997 FS
|
TV turns on normally, dark screen with 3 color dots of 5cm each green, red, blue vertically at the top. | Polyester capacitor 394 j 250v position c 409 open |