Cce Repair Tips
Search: cce
Results: 4834
Results: 4834
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| CCE |
HPS1471
|
Tsound is no output voltage on the secondary of the power supply transformer | Dz801 | Dz801 replace | fabiano3553 |
| CCE |
HPS21AVP
|
Turning on and off with the standby LED flashing | Change the transistor bc 337 power supply input q802 | DELLA FOTOS E CONCERTOS | |
| CCE |
HPS 2185FS
|
Image blurring in green and blue colors | Trc thomsom, just change | cacereletronica | |
| CCE |
TVS 2910FS
|
When turned on, the image is distorted for 5 seconds and returns to normal after the degausser relay is activated. | Place a 1r resistor parallel to the l400 coil in the filament line near the flyback. tsound is a variation in this tension. | eletronica fernandes(to) | |
| CCE |
HPS1471
|
LED keeps blinking | Open the screen if the screen turns blue with stripes without osd change tube socket | eletronica karpinski | |
| CCE |
2991
|
TV turns on but tsound is no video when tsound is and with symptoms of weak tube | Replace the 2 transistors 337 and cap47x25 and 100x25 before don't forget to check the 10 k resistor | No abl e resistor smd 435 de 4k7 etambem cap do scrim no crt | domingos macedo |
| CCE |
HPS2118
|
TV turns on and then turns off. relay is constantly arming and disarming until it goes into protection | C417, r414, d813 e dz807 | I replaced the components and the TV worked perfectly again. good luck! | DANIEL SOLÂNEA PB |
| CCE |
HPS 1495
|
White lines on the top | C 305 | 47 x 50 v | Roque |
| CCE |
HPS 1495
|
White lines at the top | C 305 | 47 x 50 v | Roque |
| CCE |
HPS 1495
|
Vertical checkered | C 302 | 2,2 x 50v | Roque |
| CCE |
HPS-21AVP
|
This TV pressed the pawer, the relay kept hitting and the LED kept blinking with b+ 117.7 normal @@@ | R414=18k, c417=330pfx2kv,d813 e d407=in4148,dz807=8v2 | Help yourself leave your tip | ELETRONICA ARNI-LEOBERTO LEAL/ SC |
| CCE |
HPS2197FS
|
Stained screen | Ptc801 replacement | Ptc801 | orlando |
| CCE |
HPS 2171
|
Doesn't start | Tsound is no output voltage on the secondary of the power supply transformer. | Replace of the power supply's IC801 oscillator ci. | Lo |
| CCE |
HPS2171
|
Doesn't start | Power supply does not act, tsound is no voltage on the secondary of the power supply transformer. | Changing the IC 801 power supply oscillator IC | Lo |
| CCE |
HPS2910FS
|
However, the screen is off and tsound is no sound. | Scream below, the adjustment was made and everything is ok. | Note: It is likely that with time of use, the kinescope will become damaged, and this will require adjustment. | Leônidas (Léo Natal RN) |
| CCE |
HPS 2003
|
No color | Memory replace worked normally | jose santos vicente | |
| CCE |
TV21US
HPS |
Blinking LED does not turn on | Ic 802 | HAVAI | |
| CCE |
HPS-1402E
|
It makes a noise but it doesn't oscillate, it doesn't turn on, the 103v voltage only gives 30v when you press the power button | Change c829 33/160v was dry, no capacitance, turns on but the sides are closed and the vertical is stretched, also change c 825 47/160. | C 825 was also without capacitance, just replaced it, it was great. | Eronaldo |
| CCE |
HPS2971
|
Tv with sidebar, open r401 18k | Replace | fabiusmax |
|
| CCE |
HPS1405
|
Time with color Time not even on Av Cristal Bon | Troque o capacitor smd c501 de 100pf | domingos macedo |