Jvc Repair Tips
Search: jvc
Results: 433
Results: 433
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| JVC |
25S1EK MXII
|
Stby led changes red to gren but no line drive | Check q902 v if missing r903 ( 2k2 ) o/c | ||
| JVC |
25S1EK MXII
|
No vision - wont tune in | C119 47n if unit. on pin 2 ic 101 | ||
| JVC |
25S1
|
No sync in off air & av mode | No sync pulses at ic201; ic103 -(mc4066bf. smd) on text board | ||
| JVC |
14ET1EK
|
Hotel mode? no chan store & "h" in top corner | Pull up res r605 27k for chip select pin was o/c | ||
| JVC |
14E1EK ONWA
|
Dead | Chopper tr 2sd1545 leaky | ||
| JVC |
1480EK
|
Stuck in st/by (timer light?) | 22µ sm cap in stn select module had leaked & broken track between pin 2 of the ic and l001 choke. | ||
| JVC |
1430R
|
Hum bar | Smoothing cap 100µ 400v | ||
| JVC |
7860
|
Bright raster. | C104 ( 10uf , 200v ) dries up , tr204 ( bc327 will do ) | ||
| JVC |
1480
|
Tuner drift | Check sm comps | ||
| JVC |
1480
|
Proc module faulty | Caused by 3 legged ceramic filter | ||
| JVC |
1480
|
Dead - when main micro sus | Check blue ceramic 3 legged filter | ||
| JVC |
HR- J240
|
Doesn't start | C971 = 2200uf 16volt | Sub c 971 = 2200 μF 16volt | |
| JVC |
HR-S 9500E
|
Cassette gets stuck when exiting | Loose clutch lever |