Lg Repair Tips

Search: lg
Results: 4931

Make	Model	Symptom	Problem	Solution	By
LG	21FU6TL CW81B	Start and cut before accessing the screen.	Measuring the +b I noticed that it went to 112 volts and then dropped to 75 volts on the flaybk pin, I released the flay pin and it remained the same, the cause was the Q16 with a leak in the protection line, I released its base and the TV turned on, that's it So, let's come together and send tips, the world is for everyone.	I replaced the Q16 and everything went well, all I had to do was pick up the bμFunfa and have a cold skol and a quick hug.	This email address is being protected from spambots. You need JavaScript enabled to view it.
LG	29FS4RLG	Swapped colors	Crystal x01		paulo masao
LG	21FU4RL	It turns on sometimes with difficulty +b with 100v (110v normal) when activated to turn on, voltage in the driver remains 0v.	Replace power supply regulator strw6554a.		@gepe
LG	21FU1RLG	Does not turn on stand-by	Diode 874 shorted, ic 806 shorted		daf eletronica
LG	CP29C85	The TV turns on, it says it's going to turn on, but it doesn't turn on. +b starts and then falls all three. good... all power supply capacitors are good.	Cause c404 100uf x16v open is next to the seletronic		This email address is being protected from spambots. You need JavaScript enabled to view it.
LG	29FX5CL	Burning horizontal outlet	Fly back then do a review r404-d404-r843-c406 and c407		HP ELETRONICA
LG	21FS4RLG		Photo coupler ic 802
LG PLASMA	TODOS	Screen flickers (black or bright dots appear on the screen	Loosen and reconnect the y-sus board connectors, if the symptom persists	Y-sus plate replace	Vosdor
LG PLASMA	TODOS	Stained screen that changes position every time you turn on the TV	Loosen and reconnect the y-sus board connectors, if the symptom persists	Y-sus plate replace	Vosdor
LG PLASMA	TODOS	Blurred image, image looks like a drawing	Loosen and reconnect the main board connectors if the symptom persists	Replace main board	Vosdor
LG PLASMA	TODOS	Blurred image, image looks like a drawing	Loosen and reconnect the crtl board connectors, if the symptom persists	Replace crtl	Vosdor
LG PLASMA	TODOS	Blurred full screen	Check the z-sus board settings if the symptom persists	Z-sus replace	Vosdor
LG PLASMA	TODOS	Horizontal strip	Loosen and reconnect the y-drive board connectors if the symptom persists	Replace y-drive	Vosdor
LG PLASMA	TODOS	One or more horizontal lines	Loosen and reconnect the y-drive board connectors if the symptom persists	Replace y-drive	Vosdor
LG PLASMA	TODOS	Vertical strip	Loosen and reconnect the crtl board connectors, if the symptom persists	Replace crtl	Vosdor
LG PLASMA	TODOS	Vertical strip	Loosen and reconnect the y-drive board connectors if the symptom persists	Y-drive plate replace	Vosdor
LG PLASMA	TODOS	One or several vertical lines	Loosen and reconnect the crtl board connectors, if the symptom persists	Replace crtl board	Vosdor
LG PLASMA	TODOS	One or several vertical lines	Loosen and reconnect the x-drive board connectors if the symptom persists	Replace x-drive board	Vosdor
LG PLASMA	TODOS	Turn on and off	Check voltage at points va and vs. Detach the power cable from the x-drive cards. if it stopped turning off	Replace x-drive board	Vosdor
LG PLASMA	TODOS	Turn on and off	Check voltage at points va and vs. Disconnect the power connectors from the y-sus board. release the y-drive board. if it stopped turning off	Y-drive plate replace	Vosdor