Panasonic Repair Tips
Search: panasonic
Results: 2900
Results: 2900
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PANASONIC |
TC14R1M
|
Dead | Resistor r 804 (150 k) open or tsh with shorted turns | ||
| PANASONIC |
TC 14C02
|
Locked, with plot, drizzle and audio, does not accept commands | Resistor r 1183 open | ||
| PANASONIC |
TC 14R1M
|
Intermittent operation | Capacitor c 813 (1 u f x250 v) with loss of capacitance or high esr | ||
| PANASONIC |
TC 14 D 1
|
Folded image at the top of the trc screen | Capacitor c 412 (100 u f x 35 v) with loss of capacitance or high esr | ||
| PANASONIC |
TC 14 C 7
|
Inoperative, protection circuit acting | Resistor r 802 (470 k) open | ||
| PANASONIC |
TC 14C 7
|
Bad picture when tuning channels. When any change is made, it becomes normal, then deteriorates | Capacitor c 112 (10 k) leaking or shorted | ||
| PANASONIC |
TC 14 C 6
|
Dead | Resistor r 803 (470 k) with changed resistance | ||
| PANASONIC |
TC14C5
|
Image without definition | Integrated circuit ic 601 (na 5606 k) with cold solders on the pins | ||
| PANASONIC |
TC 14 C 1
|
No image (with drizzle) audio at maximum volume | Resistor r 882 (330 k) open | ||
| PANASONIC |
TC 20 A 2
|
Dark, horizontal spots in the image | Capacitor c 516 (220 uf x 35v) with loss of capacitance or high esr | ||
| PANASONIC |
PT51G45U
|
Turning off randomly, . When the AC plug is removed and turned back on, it works for a while longer | Potentiometers r 1943 and r 1908 broken due to glue on the printed wiring board | ||
| PANASONIC |
CHASSI BR-2
|
Volume varying alone, image scrolling vertically | Cold solders on the crystal x 001 | ||
| PANASONIC |
TC 21V50
|
Flashing blue | R511 | ||
| PANASONIC |
TC 21V50
|
Flashing blue | R511 | ||
| PANASONIC |
TC-29Z99L
|
Turns off by itself | D511 with leak | ||
| PANASONIC |
TC-29V50
|
Low 13v power supply, sometimes it turns on, activating power on the remote burns out | Supply resistor 22r - c452 33uf low. | ||
| PANASONIC |
CT-S21L1LS
|
Image intermittently closes vertically. | Cause: ic vertical output with crystallized welds. | ||
| PANASONIC |
CT-T20R
|
Tries to turn it on but when it turns on it makes a squeak. | Stk73907-t damaged, replace | ||
| PANASONIC |
CTP-2066S
|
Aft poor | C034, c035,c001, c017, c153 e d554 | ||
| PANASONIC |
CTN-1061R
|
Off inoperative does not change channels does not adjust volume | C001, c034, c035 of 0.1uf |