Search: panasonic
Results: 2911
Make Model Symptom Problem Solution By
PANASONIC 2012
BR3L
Activates protection, just blinks the LED Q 401 smd 2sa1235a aberto Replace it Paulo Sertel - Itararé SP
PANASONIC TC14A12
BR3L
Hang up C519- 33/160 amended Replace c 519 with a new one Paulo Sertel - Itararé SP
PANASONIC 20G11
BR2
It doesn't turn on, it has all secondary power supplys, but it doesn't have it on the ic 602 D602 open Replace the diode and go out for a hug Paulo Sertel - Itararé SP
PANASONIC 20A12 / TC 14RM12L
TV
Blocked on av and vhf Press sleep or timer on the control and volume (-) minus on the TV panel together when the padlock symbol appears, go through the control in the setup menu and go to lock and deactivate the lock Ademar
PANASONIC 29A12
TV
Vertical with lines of retraces top of the screen Replace or us from saida vertical the 7840 Ademar
PANASONIC TC 20D1
TV
Does not start/does not turn on Replace c 820 (1uf x 350 v.) Ademar
PANASONIC 20A8 /14A8 E 14A10
TV
Turn on and off Replace or us from saida vertical the 7840 Ademar
PANASONIC 29KL05 /29LK05
TV
Noise not som Replace or zener d-820 (8v) and zener d-821 (7.2v). Ademar
PANASONIC 29KL05
TV
No horizontal deflection I just have a white stripe in the middle of the screen Replace c 563 of 390 k Ademar
PANASONIC 14A8 E 14A10
TV
Pale image Little contrast Jam the filament resistor Ademar
PANASONIC 20G11
TV
Doesn't work There is no +b on pin 53 of ic 601 Jump the diode d 602 short Ademar
PANASONIC TC 29KLL04M
Closed horizontal Capacitor c563 of 0.39uf sem capacitance Replace capacitor afonso Eletronica taquari
PANASONIC TC14A8
Vertical reduced to 1/3 in the center of the screen Check r425 of 27k altered ELETRONICA ESTUDIER CANOAS RS
PANASONIC TC14A8
Closed at top and bottom Service mode doesn't solve the problem, change the 1/50v c425 to a 0.22/100v one and then close it for a while in service mode. charles
PANASONIC TC20G11
BR2
Does not oscillate, when you press the power key the relay activates, without hvcc power supply D602 open ps eletronica/maceio-al
PANASONIC SA-AK 240
F6 on the panel then goes into protection, that is, it turns off * Defective sound output, solved the protection problem but still no audio after checking the voltages I found an open circuit on pin 27 of the CI SMD 2801 on the side board, the line was corrected, defect resolved Francisco Ivan Basílio - Nova ELETRÔNICA - Ibiara - PB
PANASONIC TC-33V8
NA6D
Image with return lines at the top Changed pin 9 ic451 capacitor c455 Changing the capacitor even in the capacitor marking a small loss in capacitance Helio Eletrosonic
PANASONIC DVD-S35
Doesn't start Blown fuse and diogo 1012 Changing fuse and diode 1012 (1n4007) johnny busnadiego
PANASONIC TC14A12
B3J01579
Tune only to channel 11, rest blocked I don't know Expect novinhojocal
PANASONIC TC14C6
Has all the voltages and does not oscillate Please 503 Replace ELETROCLAUDIO AGUAS BELAS