Search: panasonic
Results: 2911
Make Model Symptom Problem Solution By
PANASONIC TC-29KL05
It turned on but it wouldn't open the image, it downloaded very quickly, but when I turned it back on with the AC key with more force, it worked fine. After changing the key, it works normally. carlinhos100
PANASONIC TC-29KL05
A vertical line C563 open carlinhos100
PANASONIC TC20C6
Beeping and not turning on D835 diode in the middle of the board I found another model with d832 in the scrap yard, it worked, I didn't know which original because they had already fixed it joselito flores
PANASONIC TX-25X2S
ALPHA-4
Does not start Replace Q554, 2SD2095 and capacitor C558, 8N2 2000V Divercentro
PANASONIC TC20KL02
Works and stops Remove the q605 (smd) It was the only solution I found to resolve this problem. Bruno This email address is being protected from spambots. You need JavaScript enabled to view it.
PANASONIC TC20RM10L
Just tune in to a channel Replace diodes d003 and d002 vilmar trindade quevedo
PANASONIC SA AK18
NãO ACENDE O PAINEL
The panel does not light up The panel does not light up The panel does not light up jose
PANASONIC C4
With sound without image filament off. Saida vertical (la7837) Luciano Fontes
SOM PANASONIC SA-AK500
Weak or unlit display. R958/4r7,r959/4k7 (on the box connector board.) Luciano Fontes
PANASONIC TC-14A12
Turned off after a few minutes R520 and 521 amended guine
PANASONIC TC-33V8
NA6D
Little width and/or pin deficiency Trimpot r756 and r760 changed on pci pin correction Replace r756,760 ALEX/FETTER
PANASONIC TC20C21
It turned on, after two or three seconds it turned off Cold solder on the kinescope board max3519623
PANASONIC TC-29KL04
Turns on, then turns off Arming protection, even deactivating q520 and q 580 R556 (560k) altered cabeção natal
PANASONIC TC29G12
TV turns on normally but when turned off the brightness turns off but remains on 12v relay shorted Replaced it and it was ok
PANASONIC TC-14A12
Turns on and off, i.e. starts normally and then cuts off C 519 without capacitation and r 520 and 521 altered Replace c 519 33μF, r520 3r3 and r521 3r3 and good luck. George Pontes
PANASONIC TC29KM04
TV with vertical line on the "horizontal closed" screen Capacitor c563 exhausted, 394 i.e. 390k for 250 volts Replace the same Carlos Guerra
PANASONIC TC20A04
When the TV is plugged into the power supply, the gun generates more before appearing, the horizontal image stops and the LED flashes D511 10v change the zener as it is shorted or altered Roberto Consertos
PANASONIC SA-AK410
Activating f61, it still didn't turn on with the power key, a raspy sound Rsn315h42p broken SENPRESTOR
PANASONIC 29G12
No image and characters Diode 406 and 407 luiz de sao
PANASONIC TC-14A12
BR3L
Turns off when turned on or within minutes and before turning off screen shakes 19 This email address is being protected from spambots. You need JavaScript enabled to view it.