Search: panasonic
Results: 2911
Make Model Symptom Problem Solution By
PANASONIC U4
No sound or sync. Dj on pins of socket z6.
PANASONIC U4
No sound & blank raster. L102 o/c.
PANASONIC U4
No r/c operation No 12v to r/c rx; r1336 150r hi res; & replace 12v zener
PANASONIC U4
Memory loss - intermittent. Re-solder crystals associated with mab8440 & sab3055.
PANASONIC U4
Dead - no eht - diplay = 00 ; ht = 60v Loptx u/s tho' checked ok on tester - nla?
PANASONIC U4
Comes on then shuts off C808 47u 16v
PANASONIC U4
Comes on in standby if on/off switch is used. Relay ry1001 carbonised contacts.
PANASONIC U4
Blank raster & no sound. L102 o/c.
PANASONIC U3W
Verticals corrugated - noise at switch on. C809 ( 1u f 350v )
PANASONIC U3W
No sigs or chan display from cold Tms3453n2l memory chip (£31 from wve)
PANASONIC U3W
Line tearing. C853 ( 100u f ) , c854 ( 47u f )
PANASONIC U3W
Lack of width & brighter on right hand side. Ew modulator diodes d552 ( tvsc2715m ) , d553 ( tvsc2406m )
PANASONIC U3W
Dark pic with field foldover Q552 12v reg o/c
PANASONIC U3W
Channels - not storing channels. Ic tms3452n2l.
PANASONIC U3W
Channels - difficulty selecting channels. Ic tms3452n2l.
PANASONIC U3
Whistling & ringing verts C853 100µ 250v
PANASONIC U3
Whistles/screeches at sw on with black lines C809 1µ 350v, c853 100µ 250v
PANASONIC U3
Trips to st/by aft 1 sec Ht smoother c808 220µ 400v
PANASONIC U3
Field collapse Replaced field o/p trs but ran hot - d407 1n4148 o/c
PANASONIC U3
Field - 1/2 pic Q402 2sd856 - used tip41c