Panasonic Repair Tips

Search: panasonic
Results: 2911

Make	Model	Symptom	Problem
PANASONIC	TX29AD1DP	Int field - thin black lines at bottom	Dkh07 & d508 ma723ta5
PANASONIC	TX29AD1DP	Dead wioth fuse blown	Check positor for rattle - 96706 (expensive)
PANASONIC	TX29A3	Field twitch - int	Dry joints fop chip
PANASONIC	TX29A3	Dist pic - off tune effect with black dots over screen	Ic1601 sad2140
PANASONIC	TX28X1DP	Int signals	Dry joints tuner
PANASONIC	TX28X1	Trips off after a sec - ok on dummy load	C567 1800 pf cracked and flaky
PANASONIC	TX28X1	Line foldover	D560 ma165 s/c
PANASONIC	TX28W3	Pulsing on and off	Check ribbon cable to front drawer
PANASONIC	TX28W3	Dead	C623 100µ 50v
PANASONIC	TX28PK3 EURO 4	Locked mode displayed at sw on then reverts to st/by	Ic7066 eprom u/s
PANASONIC	TX28PK10E	No g	L351 delay line leaky. part no elb4c070b.
PANASONIC	TX28MD3	Blows mains fuse	Replace posistor and power cord
PANASONIC	TX28LD1/M	Stuck in standby	Check r558 120k for o/c
PANASONIC	TX28LD1/B EURO2L	St/by led flashes on/off - no sounde/pic	Disconnected q502 [surface mount bc847b] which shorts the hor drive from ic601 down to ground in an inhibit condition. if the line stage now cycles in time with the led, coming on in brief pulses and producing a blank raster replace ic601 vdp3108-25
PANASONIC	TX28A2X	Sound low & dist with crackle after using svideo skt	Sound switching ic 301 type m52472p
PANASONIC	TX25X1	No sound or r/c	Check leads in connectors e22 & e19 are not reversed
PANASONIC	TX25X1	Int goes to st/by	Check 2 x 270k in pri psu & str54041
PANASONIC	TX25W3	Dead - no start up	C622,c623,c631, c634 & 470k in psu & q624 s2000af chopper tr e-b s/c
PANASONIC	TX25W	Poor focus	Loptx
PANASONIC	TX25T2	Txt type lines at top of pic	Fop ic an5521