Panasonic Repair Tips
Search: panasonic
Results: 2911
Results: 2911
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PANASONIC |
TX2151T
|
Dead | Check r802 180k, r818 150k | ||
| PANASONIC |
TX2151T
|
Dead | Check r802 and r818 in power supply 150k, 180k | ||
| PANASONIC |
TX2151
|
Dead apart from low tweating noise | Ht ok but lts low - q803 s/c 2sd1272 | ||
| PANASONIC |
TX15MT
|
Dead - no power | Replace the following; c808 10uf 50v, c807 180uf 400v, r811 0r39, q801 2sd965-r, q802 2sd965-r, r815 5r6, r823 47r, c551 0.47uf 160v. c551 will also cause no pic if psu is ok. | ||
| PANASONIC |
TX14S3T
|
Dead - if replacing str chopper chip | Ensure replacement has "a" suffix | ||
| PANASONIC |
TX14S2T
|
Lack of height with foldover | Replace r521 8.2Ω | ||
| PANASONIC |
TX14JT1
|
Bbc1 lost on chan 1 but would retain it on another chan | Eeprom ic1205 pt no x24s11-1maz | ||
| PANASONIC |
TX14GV1L
|
Locking up | The official remedy for this fault from panasonic is to replace both the main microprocessor (i701) and the earom (i703). the new part numbers for these are:- i701 ms5457cu1, i703 x24c-14gv1 | ||
| PANASONIC |
TX14GV1 Z421V
|
Int reverts to st/by | Replace top210pfi standby control chip (i807) and i.r. receiver module (iq01 | ||
| PANASONIC |
TX14GV1 DAEWOO CP421
|
Relay clicking no sound or vision | Check c840 47mfd and i807 top210pfi | ||
| PANASONIC |
TX14GV1
|
Text lines on the top | Earom ic703 faulty, part no. at24c0810pc | ||
| PANASONIC |
TX14GV1
|
No pic - int comes on with bang - sound ok | Invisible crack in print at loptr coll | ||
| PANASONIC |
TX14GV1
|
Dead with mains relay clicking continuously. | Replace 47uf 25v (c840) in standby supply circuit. | ||
| PANASONIC |
TX14B4T
|
No signals found when tuning | Earom replacement ic702 24c14 & mod kit fitted | ||
| PANASONIC |
TX14B3T Z375 CHASSIS
|
Field collapse noticed when a1s advanced | Ic301 tda8456 - also do following mod - change c309 to 22µ 100v, add 0µ01 across r310 & fit 2r2 1w in place of jumper r420 | ||
| PANASONIC |
TX143T Z375 CHASSIS
|
Tripping - st/by led flashing | Loptx | ||
| PANASONIC |
TC862G
|
Line hold drift. | C505 ( 1u f ) | ||
| PANASONIC |
TC800G
|
Frame collapse. | C407 ( 3.3uf , 16v ) tantalum. | ||
| PANASONIC |
TC486
|
Line hold drift. | C505 ( 1u f ) | ||
| PANASONIC |
TC481
|
Int loss signals | R545 dry |