☰

Philips Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: philips
Results: 14210
Make Model Symptom Problem Solution By
PHILIPS 21GX1668/78
Poor contrast R3460 changed Replace deuner
PHILIPS 20PT3336
Dead Floor 6765 Replace the same eletronicaapolo
PHILIPS 20PT228
Nothing works, the stand bay LED doesn't even light up Secondary supply +b low oscillating from 50v to 67v Replace do ic 7520 (tea 1507) LOU
PHILIPS 21PT9467
Image closes after a few minutes Deflector Adjustment or replace. LO
PHILIPS 20PT3331
Vertical closing at the top and turning off after a few seconds Drained 2460 capacitor Replace for a good one. Ademir solânea pb
PHILIPS 14PT3131
When cold... in a few more seconds it turns off, but when it heats up it works normally. It could be the vg2 that is out of adjustment, adjust the vg2. jayjunior
PHILIPS 21PT8467/78
Turns on then turns off triggers protection Rusty tube no g2 On g2 it oxidizes and shorts out g2 and with the g2 wire give some sparks to the pin obs. resolve, but the defect may return again (be careful when notifying the customer) arasonic
PHILIPS 20PT122A
Don't tune in Eprom Rewrite eprom data DIGITAL TEC ELETRONICA
PHILIPS 14PT3336/78
LO6 11 		Blue screen with traces and then turns off Kinescope socket with humidity, due to relative humidity on rainy days and oxidation on its internal terminals Replace the kinescope socket with new and good quality PAULO SERTEL ITARARÉ SP
PHILIPS 14PT3336/78
L06.1L 		Blue screen with traces and then turns off Socket with humidity, due to relative humidity on rainy days and oxidation on its internal terminals Replace the socket with a new one of good quality PAULO SERTEL ITARARÉ SP
TV PHILIPS 29PT458A/78
* 		When the TV heats up +/- 1 hour of time it turns off, after this time it starts to turn off continuously and then it doesn't obey but nothing starts working again only if it is turned off with the main switch and everything comes back on again. Encontrei q7450(smd) proximo do flay back I put bc 547 and it was normal wagner
PHILIPS 20PT120A-PT110-PT210-PT121-PT220
This TV turns on the power, the standby LED blinks about 5 times and does not turn on the power supply +b 95v ok @@@ Resolder or no smd c2442 Help yourself leave your tip ELETRONICA ARNI-LEOBERTO LEAL/ SC
PHILIPS AS 800
Turns on the display and goes off and only the stop is on Open transistor t 7252 and open resistors 3333e 3334 and 3300 and 9601 carlos jpramos
PHILIPS 29PT9467C/78
L 5.0 		Half-closed vertical line L 108 open on pin 39 of the micro Changing the same...tip from my friend SÈrgio Maniero last December...it worked for me despite the symptom being different from his... sansão1
PROVIEW /PHILIPS 29 N 6 P
Without high voltage, with sound and cannon off but the power supply works perfectly. Resistors with heat changes the value (resistance). Replace resistors r467=10k/2w and r703=10k/2w Dé Andrade
PHILIPS 29GX1899
The moment it turns on, sound, video and color come on, after 3 seconds it becomes colorless and the screen darkens and cuts the sound, changing the channel repeats the same symptoms again, the screen goes dark but the loudness continues. Faulty eeprom Replace eeprom with data. Ademir tc
PHILIPS 28PW6506/01
L01.1E AA 		Horizontal opens the width poorly, side dth becomes narrower Ver e mudar c 2405 220uf 25v c2455 47uf 35v Pingo
TV PHILIPS 29PT 6566
L04-AA 		Reduces the frame by giving 3 colored lines at the top vertically and turning off after 5 minutes The cause a r 3457 1r open jose ferreiras
PHILIPS 21PT1663/11
L7.2E 		After a few minutes the image begins to slowly shift to the right. when it gets close to the center it goes into protection and goes to stby. Deflector coupling capacitor h leaking. 220pf 2kv Joaquim Monteiro
PHILIPS 32PFL3403
Won't turn on, fuse blown Check leak in bd1, and its replacement. BRUSKE