Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
21PT5433
|
When connecting with colored lines and then with retraction - c2460 polyester, c2465 electrolytic vertical | C2460 replaced, depending on the symptom state replaces | http://rmeletronica.com.br | |
| PHILIPS |
PT314/78
|
Turns on only when it drizzles and turns off in 5 seconds | Tuner | matieski | |
| PHILIPS |
21PT5435
78R |
Dead | Contacts in the 1822 connector shorted (torn with damage to the tracks | Reconnected and replaced r 3448 (1Ω) device started working again | miguelito |
| PHILIPS |
42PF7320
PLASMA |
The device turns on and then enters protection mode. | Open or short-circuited speakers or the output c.i. is faulty | Disconnect the audio amplifier connectors then turn on the device, it should work, check the speakers, if they are open or short circuited or altered, replace them with original ones checking the characteristics, if the speakers are normal, replace the c.i amplifier. | WAGGUINHO |
| PHILIPS |
29PT4631/78
|
When turned on, normal image, however it turned off after 30 seconds. | Transistor 7461- bc337 with low gain | As a complement, check voltage and capacitance of c 2561 (100mf 160v), replacing if necessary. | OLIBIO ESTUDIER |
| PHILIPS |
20PT324
|
Image shifted to the right with a dark bar on the left side | Resistor 3404 | ||
| PHILIPS |
29PT4631
|
Image folded on the right side | C2455 | ||
| PHILIPS |
20GL1045
|
High power supply | R3348 amended | ||
| PHILIPS |
20PT3331
|
Vertical with 3 colored stripes | C2460 | ||
| PHILIPS |
20PT424
|
With sound, without image | R3404(12k) and q7610(bc847) open | ||
| PHILIPS -SOM |
FW-M912
|
Returns to stand by only with red LED on | R3128, c2112 | ||
| PHILIPS |
21PT6456
|
Vertical closed at the top with return lines | C2460 | ||
| PHILIPS |
21PT5435
|
Normal audio, normal osd, dark background | R3442 open | ||
| PHILIPS |
21PT5433
|
Vertical closed at the bottom | Check eprom data, replace, service mode 0-6-2-5-9-6 | ||
| PHILIPS |
29PT2631/78
NAO LEMBRO |
When I turned it on, the image was distorted on the horizontal output. | Changing the ex 2455 power supply capacitors and so on | andre | |
| PHILIPS |
DVP3005
|
So fica em stand by | Resolved from flech memory | ALAN | |
| PHILIPS |
29PT4631 78R
|
The device works for a few seconds and turns off | After checking all the components that could cause the problem, I noticed that in the seconds that the TV was on, the image was a little blurry. | Keep pressing the channel replace keys on the device repeatedly, so the TV will not turn off, giving time to make adjustments on the horizontal transformer screen. TV turns off by itself. | ELT S e M |
| PHILIPS |
20PT3331
|
No audio in rf | Capacitor 2201 4n7 open | mauro | |
| PHILIPS |
29PT4635/78
|
Normal power supply, TV turns on and then goes into protection | Changed horiz output. bu4508dx and elect capacitor. 47/25v position 2455 | VALDIR(DIDA) | |
| PHILIPS |
20PT222
|
Turns off after a while | Probable cause, c2447 |