Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
21PT2663
L7.2E |
Turns on and after a few seconds returns to standby | C2443 without circuit capacity + 13v def. vertical | Raimber | |
| PHILIPS |
20PT529A
|
N works 220 | Defective 6523 diode | Replace or even replacement with another 200v | markinho brasil |
| PHILIPS |
20PT259A
L01.2L AB-2K2 |
Working perfectly, suddenly, there is no video and lines of retraces accompanied by a rumble in the audio and then it turns off. | Ic 7901 (an 7522n) with faults, after the replacement the TV worked perfectly. | Léo, Natal-RN | |
| PHILIPS |
14GL1314
|
Tuning was lost (image with drizzle was black and white) and the sound was buzzing | Looking for poorly welded parts, when pressing the tuner the chassis would bend and the image was good | I resoldered the parts in the region where the chassis tilted the most (defect resolved) | JOSE CLAUDIO |
| TVC PHILIPS |
20PT324A/78R
|
Device on standby starts but when turned on the apparently blurred tube returns to standbay | 1k resistor r2343 on open tube plate | ||
| PHILIPS |
20PT3331
|
Disarming or turning off | Scrim | Adjust scrim by pressing volume | |
| PHILIPS |
20GL1045
GR1-VA |
Warming up the buk444 | Buk444 burning | Resistor (3321) replaced | Gilberto Antonio |
| PHILIPS |
20GL1049
|
Doesn't start | Fly back replacement | Helderson | |
| PHILIPS |
21PT5432/78R
|
Turning off and no image | I changed the tube socket which was oxidized and went into service mode and changed the akb from 0 to 1 and remade the settings on the screen and everything was normal. | gigante | |
| PHILIPS |
21PT5435
L03.1L |
TV turning off, with spark in the focus (socket spark) | Enter service mode. change akb value from 0 to 1. and everything is normal. | PATRIARCA | |
| PHILIPS |
29PT4643/78
|
Does not turn on, 7504 burnt out | It arrived with the 7504 burned out, I replaced it but the TV wouldn't turn on, it just lit up the LED, I checked the power supply items like 2532- 3513 - 3514- 6514- 6533- 6534- 6535- 6536- 6572- 7512- 7513- 7514- 7531 and it only worked after replacement of 7511 (tea1506) smd. | juzemar | |
| RADIOLA-PHILIPS |
56KV1508
GR1AX |
It has a power supply (95v and 9v), but it doesn't start but if we apply 12v to pin 7 of the IC 7020, it works without problems | See diode 6523 1n4148, it is open, also change c2636 (9v) | piratadoar | |
| PHILIPS |
21PT5433/78R
|
TV turns off next 5 seconds | Change capacitor 2455 or transistor 7440 good luck | Rovanie | |
| PHILIPS |
20PT4331
|
No sound and vertical closed bottom | Replace o eprom | Scorpion | |
| PHILIPS |
21PT6456
|
Power supply crying and liver vestibule, | 1r 3446 resistor that makes 12v | francisco saldanha | |
| PHILIPS |
20PT222A - L7L
L7L |
Turns off after a few minutes without error | Screen adjustment | To adjust the screen 1- service mode 062596 + menu, item akb, replace to option 1; 2- put the TV on AV, adjust the screen potentiometer until there are no return lines; 3- set the abk option back to 0 | Joaquim Andrade |
| PHILIPS |
20GL 1343
|
It doesn't turn on it doesn't have 70 volts | Ts 6345 bf 423 | Transistor replaced | MATIESKI |
| PHILIPS |
25PT4523/36
S MD1,2E AA |
Does not turn on, fuse | Na power supply d510 a d513 (1n4007), c2543 c2544 (222k 2kv) | joaquim cunha | |
| PHILIPS |
20PT3331
|
Without image, but with characters. | 3441 resistor open. | Zé Carlos | |
| PHILIPS |
14PT3131
|
Vertical closed at the bottom to the middle of the screen and without sound | Epron deprogrammed in my case it was a 1n smd 2641 capacitor that was leaking and deprogrammed the epron | renabetu |