Philips Repair Tips

Search: philips
Results: 14210

Make	Model	Symptom	Problem	Solution	By
PHILIPS	14PT3005 L03.2L AA	Upper line is protected. screen	C2460 devalued 0.068	Replace c2460 r 3446 1 homs	ELECTROFRIO
PHILIPS	14PT3005/44 L03.2L AA	3 upper vertical stripes (r-b-g). screen	C 2460 0.068	Replace c2460	ELECTROFRIO
PHILIPS PLASMA	42PF7320	Dead	Chap. c 8059 and c 8060 replace the two		DEBIQUE
PHILIPS	21PT5437/78	Dark screen with normal osd	Open resistor	R3442 120k was placed 100k	NELSON
PHILIPS	21PT5437/78	Dark screen with normal osd	R3442		NELSON
PHILIPS	21PT9467/78 ***	Remote control and keyboards do not obey (message in the left corner of the factory screen)	Data loss	Ic-101 eepron 24c08 replace e pronto.	jose wagner
PHILIPS	29PT5642 L04U AA	When turning on stand by the power supply keeps pulsing and does not start horizontally.	Leaky coupler photo		antonio
PHILIPS	29PT4631	Turns on and off after a few seconds	Replace the two bc's 327 and 337 with bd135 and bd136	And the note dies	AdrianChapadão
PHILIPS	29PT5642	Don't Start	Photo opening 7513 direct exchange
PHILIPS	29PT4635 PV1913916	When the TV was turned on, the power supply kept pulsing but it didn't arm,	The bu 4508dx was burned out, I replaced it but the TV continued to have more problems, when turned on it turned off in 3 seconds.	I went to the extreme and found the defect was the electrolytic capacitor c2455 which is located close to two transistors which were also bad (7461-c337)-7463-c 327. Then the TV went fileeeeee	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	21PT230	After turning on the TV, it returns to standby mode.	Electrolytic capacitor 2551.47mf/160v, without capacitance.		juares
PHILIPS	14GL1014	No sound image disappearing.	Exchanged ci		ransabom
PHILIPS	29PT4631	The power supply relay engages and then opens.	Diodo zener 6541 de 10v(smd) com fuga.		Persio
PHILIPS	20PT3331	Dark stripe right side horizontal direction	Delete r 3403		paulo artur rio de janeiro
PHILIPS	21PT8467 L031L	Horizontal output heating up, noise in the horizontal oscillator, then tripping.	Replace r 3445 from 1 open r		miro maciel
PHILIPS	29PT4635/78	After a while it was on, it would make a hissing sound in the flay's cup and then turn it off by itself and not adjust the screen.	I changed the flay and capacitors close to the flay circuit and it solved the problem		kbça
PHILIPS	14PT414A	When turned on, the TV has a blue screen and retracing lines and then turns off.	I checked the tube socket and everything was normal, that's when I checked a resistance and discovered that it was altered, its real value was 1 r and it was measuring 5k3. (r3347)	I replaced it and it was fine	This email address is being protected from spambots. You need JavaScript enabled to view it.
PHILIPS	20PT524 L9.2	Dark bar on screen disarming	D6400 e d6401		tectronica
PHILIPS	20PT3331	Turns on after 5s the high and low voltages	3443 e 3444		dj carlinhos
PHILIPS	FW860P	No sound	Fuse 1360 open and ci an7164 blown		Jaison