Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
14 PT 1563
L6 |
Power supply beeps and won't turn on | When turning on it makes a hissing sound in the horizontal area and it doesn't start | Replace the capacitor in position 2423 )330pf 1kv | pastelnata10 |
PHILIPS |
29PT4643
|
It doesn't turn on, just the stand by LED blinking | C 2414 shorted, smd. | Replace the 2414. Note: the smallest capacitor I've ever seen. | |
PHILIPS |
14PT218
|
Sizzling sound, good picture | C2227 4n7 smd em curto | C2227 replacement | |
PHILIPS |
29PT4635
|
Alloy generates voltage and cuts immediately | Deflectora | julio itaguai | |
PHILIPS |
21PT5433
|
Turning off after 8 seconds on, giving error 11 | Fly back | Fly back | silva2 |
PHILIPS |
21GX1669
GR6-AL |
Dark image, only figures can be seen | C 2573(47k) shorted | ESPER | |
PHILIPS |
21GX1669
GR6-AL |
Expands and warps the image when changing channels | R 3573(470 r) open | ESPER | |
PHILIPS |
DVP-4000
|
Read cds and not read dvds | Change the optical unit | ||
PHILIPS |
14GL1314
|
Takes time to call | C 2351 | ||
PHILIPS |
20PT3336
|
Normal power supplys TV turns on and the screen does not light up (kinescope with filament off) then goes into protection mode | Resistors 3343 and 3344 | WAGGUINHO | |
PHILIPS |
20PT3336
|
When switching on, flash the stand by LED and then disable the power supply (protect mode) | Transistor 7540 open/replace it | WAGGUINHO | |
PHILIPS |
20PT3331
|
Normal power supplys TV turns on and the screen does not light up (kinescope with filament off) then goes into protection mode | Resistors 3343 and 3344 | WAGGUINHO | |
PHILIPS |
29PT4635/78
29PT4635/78 |
The bu 808 keeps burning in the fountains | I don't know | marcos | |
PHILIPS |
21PT8467
|
With characters and one hundred luminance | R 3442 of 100k open on the abl line | ||
PHILIPS |
29PT6566
L04.LAA |
Black band on the left side (08 cm) (lack of width on the left side of the screen) | C-2486 | I replaced the c-2486 everything went back to normal | Rogermons |
PHILIPS |
20PT3331
|
The filament turns on and off 3 times and remains off | Q 7491 smd | Dj carlinhos | |
PHILIPS |
21PT5433
|
Low sound (very low) | Swap c2444 470/16v | Beto Eletronica | |
PHILIPS |
PT3336
L03.6L |
Vertical stroke and turned off | R 3448 | juci | |
PHILIPS |
20PT 3331/78
|
No sound when turning on the TV after some time, the sound returns but is low. normal image. | Changed the c 2444 capacitor with low capacitance. This capacitor is close to the fly bak, for those who don't have the schematic. OK. | jaironuness | |
PHILIPS |
29PT4641
|
Does not turn on, and the stand-by LED does not light up | Change coupler photo |