Philips Repair Tips

Search: philips
Results: 14209

Make	Model	Symptom	Problem
PHILIPS	MD2.11E	Noise (humming or low frequency whistle) coming from the picture tube	Mount a bleeder (ht capacitor) between the lot and the picture tube. this bleeder is supplied as a service kit (4822 310 11113) and include all material and an instruction note. remarks :iris symptom code 2145
PHILIPS	MD2.11E	No sound from both speakers. input audio-ampl. pin 1 and 9 ok	Check and replace if necessary zener diode d6754 (bzx55c 18v; 4822 130 31024) on the lsp.
PHILIPS	MD2.11E	No reaction on remote. (green led is blinking ok)	Input level of pin 54 of ic7200 (p96ce201abb) on txt and control panel is too low. check and replace if necessary zenerdiode d6225 (5v6; 5322 130 83611) on txt and control panel.
PHILIPS	MD2.11E	No picture, sound ok.	Check and replace if necessary ic7315 (tda9155; 4822 209 90038) on the ddp.
PHILIPS	MD2.11E	No picture, sound ok.	Check and replace if necessary ic7500 (tda4780; 4822 209 90035).
PHILIPS	MD2.11E	No picture from if module when set is cold. osd = ok	Check and replace if necessary ic7100 (tda9811v3; 4822 209 13003) on the if module.
PHILIPS	MD2.11E	No or slow reaction to rc / not to standby	Slow response due to problems with i2c communication. check pin 12 of connector i46 on the audio module (scl line). look fo a badly soldered (oxidated) pin 12. resolder pin 12 if required.
PHILIPS	MD2.11E	No operation; error codes 47/44/48/69.	Check connector of horizontal deflection (l17).
PHILIPS	MD2.11E	No e/w modulation.	Check and replace if necessary resistor r3481 (1k; 4822 050 11002) and fet t7480 mtp3055ef1; 4822 130 63726).
PHILIPS	MD2.11E	No dolby on screen display with vcr playback of a dolby signal	Change the set software (pos. 7202 on txt & control panel) into v_00540 or higher and for -/58 sets into v_00530 or higher. codenumbers: v_00530 4822 900 10857 v_00540 4822 900 10771 remarks :introduced in production in week 96
PHILIPS	MD2.11E	No aci / only englisch language. no err.	Check and replace if necessary ic7201 (24c16; 4822 209 33251) on the txt and control module.
PHILIPS	MD2.11E	Modification	Modification during production the picture tube of the 29" md2.11 and md2.12 sets has been changed from a a68esf002x43 (4822 131 20585) into a a68esf002x043 (4822 131 11232). the new picture tube (a68esf002x043) needs no north/south module anymore.
PHILIPS	MD2.11E	Lines in picture with movie-expand. interpolation not ok	Check and replace if necessary prozonic ic7447 (saa4990h; 4822 209 90034) on the feature box.
PHILIPS	MD2.11E	Interruption of mosaic mode when using decoders connected to external	When the set is in mosaic mode and the preset from the decoder appears on the screen (eg. canal+), the mosaic mode is interrupted and the set switches back to the last preset before switching on the mosaic mode. this problem is caused by a wrong setting
PHILIPS	MD2.11E	Intermittent no picture and/or sound	Check pin 12 of connector i46 on the audio module (scl line). look for a badly soldered (oxidated) pin 12. resolder pin 12 if required.
PHILIPS	MD2.11E	Intermittent no picture	Check pin 12 of connector i46 on the audio module (scl line). look for a badly soldered (oxidated) pin 12. resolder pin 12 if required.
PHILIPS	MD2.11E	Intermittent no audio	Check pin 12 of connector i46 on the audio module (scl line). look for a badly soldered (oxidated) pin 12. resolder pin 12 if required.
PHILIPS	MD2.11E	How to enable/disable "child lock"	Press "menu" button on remote control. when the menu appears on the screen, you select "features" (this expression is language dependent) within "features", the "child lock" can be enabled or disabled.
PHILIPS	MD2.11E	Flashing red led, protection, intermitting failures.	Check on +5 v panel the soldering of c2350. also check and resolder pin 1,2,3, and 10,11,12 of connector v50 on the lsp.
PHILIPS	MD2.11E	First minutes sync. failure; err 29.	Check ic7505 on fbx for temperature dependency and replace if necessary: software fbx3-f; 4822 900 10982 software fbx4-eco; 4822 900 10745.