Philips Repair Tips
Search: philips
Results: 14210
Results: 14210
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
FL1.1S
|
Overview of sops repair kits | Overview of sops repair kits ---------------------------- fl1.0 ag00 upto ag03 4822 310 20492 fl1.0 ag04 and higher 4822 310 31921 fl1.0s 4822 310 31924 fl1.1 25" and 28" 4822 310 31919 fl1.1 33" 4822 310 31932 fl1.1s | ||
| PHILIPS |
FL1.1S
|
No sound, "on, standby, i" leds blinking | 10mhz crystal 1602 on the ssp defective, 4822 242 80276 | ||
| PHILIPS |
FL1.1S
|
No colors in tv mode | Check ic7365 (tda4650) on the ssp (4822 209 30837) | ||
| PHILIPS |
FL1.1S
|
Modification tda4680/v4 -> tda4681/v1 on the ssp | Modification tda4680/v4 -> tda4681/v1 on the ssp ------------------------------------------------ during production ic7430 tda4680/v4 has been changed into the tda4681/v1 (4822 209 32271). together with the ic also some other components must change: - ite | ||
| PHILIPS |
FL1.1S
|
Modification tda4660 -> tda4661 on the sops | Modification tda4660 -> tda4661 on the sops ------------------------------------------- during production position ic7366 on the ssp has been changed from a tda4660 into a tda4661 (4822 209 31714). together with this ic also some other components are chan | ||
| PHILIPS |
FL1.1S
|
Modification improved bandpass for high frequency | Modification improved bandpass for high frequency in -/61 sets -------------------------------------------------------------- on the korean stereo panel the following items are changed: - item c2080 added 10nf 50v (4822 121 41857) - item c2083 changed int | ||
| PHILIPS |
FL1.1S
|
Modification for improved +5v | Modification for improved +5v ----------------------------- item d6551 on the large signal panel has been changed into bzx79-b7v5 (4822 130 30861). remarks : introduced in production in week 9312. | ||
| PHILIPS |
FL1.1S
|
Modification | Modification ------------ item 2228 on the lsp is changed into 33nf (4822 122 31981). reason: to improve reliability of capacitor c2241. remarks : introduced in production in week 9325. | ||
| PHILIPS |
FL1.1S
|
Low frequency hum from subwoofer, buzz from right hand squeeter. | Check dc level on pin 1 and 9 of ic7011 (tda1521). if not correct, replace (4822 209 63913). | ||
| PHILIPS |
FL1.1S
|
Low brightness txt and osd, picture ok | If this condition occurs, check the option codes. resetting the option code numbers as per the service manual provided the cure. | ||
| PHILIPS |
FL1.1S
|
Limited control range of the tint control | Add on the ssp r3381 and ground 6k8 (4822 116 52296). to be soldered between pin 17 ic7365 and ground 9379/2375. remarks : introduced in production in week 9344. | ||
| PHILIPS |
FL1.1S
|
Limited control range of the tint control | Add on the ssp r3381 and ground 6k8 (4822 116 52296). to be soldered between pin 17 ic7365 and ground 9379/2375. remarks : introduced in production in week 9344. | ||
| PHILIPS |
FL1.1S
|
Jitter | In pip unit change the value of r3336 to 4k7. | ||
| PHILIPS |
FL1.1S
|
Intermittent nicam decoding. | Replace c2108 on the multi sound panel into 33pf (4822 126 10324). remarks : introduced in production week 9129 | ||
| PHILIPS |
FL1.1S
|
Intermittent nicam decoding. | Replace c2108 on the multi sound panel into 33pf (4822 126 10324). remarks : introduced in production week 9129 | ||
| PHILIPS |
FL1.1S
|
Interference in picture. | Change 9441 on ssp into 33m (4822 152 20678) change 9533 on lsp into 33m (4822 157 52314) add item 2000 on lsp 2,2nf 2kv (4822 122 33802). remarks : introduced in production in week 9326. | ||
| PHILIPS |
FL1.1S
|
Interference in picture. | Change 9441 on ssp into 33m (4822 152 20678) change 9533 on lsp into 33m (4822 157 52314) add item 2000 on lsp 2,2nf 2kv (4822 122 33802). remarks : introduced in production in week 9326. | ||
| PHILIPS |
FL1.1S
|
Instant colour/tint change problem. | Use latest software version; v3.3 (4822 900 10299) remarks : introduced in production in week 9218. | ||
| PHILIPS |
FL1.1S
|
Failure of transistor ts7504 or ts7506 due to flash-over of crt. | If ts7504 or ts7506 has to be replaced it is recommended to replace both transistors. - change eht cable into 4822 230 20172 - change r3508 into (2k7; 4822 116 53418) - delete r3504 remarks : implement service solution only for sets produced bet | ||
| PHILIPS |
FL1.1S
|
During production an eeprom protection panel | During production an eeprom protection panel (4822 212 31266) is introduced. together with this also the following components have to be changed: on the small signal panel: - add position 3256 and 3257 4k7 (4822 051 10472) - delete position 3280 and 3281 |