Philips Repair Tips
Search: philips
Results: 14206
Results: 14206
Make | Model | Symptom | Problem | Solution | By |
---|---|---|---|---|---|
PHILIPS |
HL3254
|
It doesn't work (it stays off). | Check that the 2k wire resistor is not open, see also 1n4142 diode with leakage (12v). * Dec 94 BC *. | ||
PHILIPS |
HL3254
|
Pulse function does not work | Function key with oxidation. * Dec 94 anac *. | ||
PHILIPS |
GR6-LS
|
Vertical deformed compressed parts | C2226 (pin 51 bimos) causes compression of the lower part of the screen. *03Sep98 sp224* | ||
PHILIPS |
GR6-LS
|
Green fabric | Check integrated 7051. * 21ago97 ctr *. | ||
PHILIPS |
GR6-LS
|
Dark "black" screen (see also bril4). | R3585, 3586. *01Sep98 mg608* dark screen with retrace lines. check and or repro list the addresses that are probably changed. *03Sep98 spe188* | ||
PHILIPS |
GR6-LS
|
Gray screen (no video) | R3060 (tube plate) open. *03Sep98 h.desk* without luminance and with retrace lines, check ic7273 (tda4662). *17Sep98 CP160* | ||
PHILIPS |
GR6-LS
|
White screen, without retractions. | R3060 (22e), white screen when turned on and then the device turns off. *08Sep98 sp534* | ||
PHILIPS |
GR6-LS
|
Blue fabric | Check integrated 7053. * 21ago97 ctr *. | ||
PHILIPS |
GR6-LS
|
So fica em stand by (power off). | 1262 (bimos crystal). *03Sep98 sp224* | ||
PHILIPS |
GR6-LS
|
No sound. (with or without image for TV, VCR). | Corrupted eeprom causes loss of sound. *01Sep98 mg399* c2807 (pin 7 stereo decoder) causes loss of one of the channels. *03Sep98 sp224* | ||
PHILIPS |
GR6-LS
|
No tuning bass channels. | Possible defective tuning unit (u1290). * 21Aug97 jpba *. | ||
PHILIPS |
GR6-LS
|
Without horizontal synchronization. | C2503. *05nov98 h.desk* | ||
PHILIPS |
GR6-LS
|
Noise not som | T7230 (pin 7 bimos). *03Sep98 sp224* c2755 no capacity. *08Sep98 df102* | ||
PHILIPS |
GR6-LS
|
Remote "locator" does not work. | Change in bank1 f9 from ff to f7. * 16oct97 jpba *. | ||
PHILIPS |
GR6-LS
|
Intermittently loses tune or (loop). | If the device is ok on another system (PAN/NTSC), check comb filter panel, possibility of defect in the regulator 5v. * 21Aug97 jpba *. check programming table (change bank 00 to bank 01) and check addresses: f8=a9, f9=b7 (2 | ||
PHILIPS |
GR6-LS
|
It doesn't work (it stays off). | Check possible short in tsh 5503. * 15set97 ctr * check sops trafo (pin 8 with broken track). * 16oct97 jpba *. check transistor 7502 (broken terminal). * 16Oct97 jpba *. r3422 or r3423 *01Sep98 mg6 | ||
PHILIPS |
GR6-LS
|
Does not open vertically | Capacitors soldered to the eeprom (filter) terminals has caused the upper part of the screen to go dark. *03Sep98 sp224* | ||
PHILIPS |
GR6-LS
|
Factory service mode. | If fa, fb, ... appears in place of sa, sb, ..., press vol and can+ simultaneously to exit. * 16oct97 jpba *. | ||
PHILIPS |
GR6-LS
|
Return lines (retraction). | R3060 (22r). *18set98 cp160* | ||
PHILIPS |
GR6-LS
|
LED(s) flashing. (repeatedly) | Five times, check possible short in tsh 5503. * 15Sep97 ctr *. six times, check diode 6505 for short, see also tsh 5503. * 15Sep97 jpba . check transistor 7502 (broken terminal). * 16Oct97 jpba *. r3537 (2k7) open. |