☰

Philips Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search: philips
Results: 14206
Make Model Symptom Problem Solution By
PHILIPS GR6-AL
It doesn't work (it stays off). Check integrated 7400. * 15set97 ctr *. t7501 (h.driver). *17Sep98 sp443*
PHILIPS GR6-AL
No characters/menu appear. Verificar capacitor 2252 e 2250. * 16abr98 sp532 *. r3367 alterado (pino 30 microp). *31ago98 mg335*
PHILIPS GR6-AL
Horizontal lines (bottom or top). Try to change address 49=12. * 16oct97 jpba *. check capacitors 2584 (1µf) and 2587 (1000µf). * 16Jul99 acm *.
PHILIPS GR6-AL
LED(s) flashing. (repeatedly) Dark screen, when turned off, the screen lights up: check 7346 (24c04). * 03mar97 anc *. blinks 2 times and does not work, check transistor 7500 (driver), and resistor 3537 (2k7) open. * 16oct97 jpba *. flashes 6 times and does not work, check
PHILIPS GR6-AL
Dos/menu - with changed characters. R3367 alterado (pino 30 do microp). *31ago98 mg335*
PHILIPS GR6-AL
Turns off immediately after turning on. Verificar capacitor 2503 (10nf). * 16jul99 acm *.
PHILIPS GR6-AL
Turn off inter. or protect (rew 3 for vcr). Check integrated 7400. * 15set97 ctr *. c2411 with leak. *18Sep98 CP160* check resistor 3419 (10r). * 16Jul99 acm *.
PHILIPS GR6-AL
Image delay when changing channels or when turning on. Check kinescope. * 18Sep97 ctr *.
PHILIPS GR6-AL
It beeps loudly (power supply), but it doesn't work. Verifciar capacitor 2503 (10nf). * 16jul99 acm *.
PHILIPS GR6 LS
Return lines (retraction). C 2587 +16v elco. the screen goes dark with lap portraits laughs. * 04Aug98 sp602 *
PHILIPS GR6 LS
Interference in the image Check regulator 7905 (5v) on the comb filter panel. * 25jun97 jpba *.
PHILIPS GR1-VA
Vertical flutter Capacitor 2415 (100nf) aberto. * 07nov95 anc *. resistor 3415 (220e) aberto. * 17jul96 anc *.
PHILIPS GR1-VA
Vertical closing intermittent. Check open capacitor 2415 (100nf). * 07nov95 anc *. check track below jump 9415. * 15may96 anc *. check resistor 3415 (220e). * 17Jul96 BC *. possibility of failure in the 6410 diode. * 25jul96 anc *.
PHILIPS GR1-VA
Vertical with little amplitude Check resistor 3426, 3417 and 3418 may have one of them changed. * 25Jul96 BC *. see resistor 3229 (1m) changed. * 30Jul96 jpba *.
PHILIPS GR1-VA
Voltages above specified Resistor 3342 (18k). * 02out96 jpba *. resistor 3348 (11k) alterado. * 06dez96 irhd *.
PHILIPS GR1-VA
Voltages below the specified (vo, +b,..) Vo (92v) low, see 5505 with leakage. *out 95 ctr*. all fly back output voltages, see graph 5505 code. 4806 148 87014, the code is wrong in the manual. * 25Jul96 BC *. +70v= see changed resistor 3341. * 30Jul96 jpba *. +70v= see: 6345,
PHILIPS GR1-VA
Cyan screen (no red) = red1 3722 resistor open. * 04Jul96 jpba *. resistor 3276 (1k) open. * 23jan98 jpba *.
PHILIPS GR1-VA
White screen, without retractions. Check changed resistor 3229 (1m). *29Aug96 fr*
PHILIPS GR1-VA
Noisy or crunching sound Check changed resistor 3923 n(82Û).* 23jan98 jpba *.
PHILIPS GR1-VA
Just tune in to channel 2. Check changed resistor 3958 (18k). * 21Aug96 ctr *. If eeprom is replaced, perform tuning recording. * 28Aug96 anc *. check resistors 3961, 3962, 3963. * 29ago96 jpba *.