Samsung Repair Tips
Search: samsung
Results: 3844
Results: 3844
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SAMSUNG |
BN44-00098A
SMPS |
Smps power supply failure. capacitor failure | C111, c112 (680µf/25v 20% 105ºc), c113, c114(1000µ 20% 10v), c115 (330µ/10v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00182E
SMPS |
Smps power supply failure. capacitor failure | C113, c116, c115 (1000µf/10v 20%), c119(330µ/10v 105ºc), c112, c108 (820µ/25v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00124Q
SMPS |
Smps power supply failure. capacitor failure | C109, c110 (1000µf/10v 20%), c111(330µ/10v 105ºc), c112, c113 (820µ/25v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00124L
SMPS |
Smps power supply failure. capacitor failure | C109, c110 (1000µf/10v 20%), c111(330µ/10v 105ºc), c112, c113 (820µ/25v 105ºc) | Pablo | |
| SAMSUNG |
BN44-00124M
SMPS |
Smps power supply failure. capacitor failure | C109, c110 (1000µf/10v 20%), c111(330µ/10v 105ºc), c112, c113 (820µ/25v 105ºc) | Pablo | |
| SAMSUNG |
PL43F4000 BN94-06693E
|
Stretched image | Install the pl51f4000 main board | When the image is stretched It is simply because the board is configured for the 51 inch display, just replace the position of the resistor r868 xga to r859 wvga and zr869_fhd to r860_hd and if it is the other way around, from 43 to 51 just do the opposite! In some cases, the TV may work without an image, just replace the ic2001_lo memory, taking it from the old board. | RAFAEL SENA |
| SAMSUNG |
CL29C650QG
|
Turns off and on by itself | R330 which is a 5.1v zener | Put a new one | Dj Velk |
| SAMSUNG |
LN32R71BAX
|
Check dry electrolytic capacitors on main board | Tsound was no sound and the image was failing | Rmseletronica | |
| SAMSUNG |
CL-21K40MQ
|
TV changing channels alone | Cause was the dz 213 zener diode with a super leak | Adalton ams | |
| SAMSUNG |
CL21K40MQGXXAZ
|
Vertical closing at the top and doubling the image, tsound is no power supply on pin 6 of the vertical ci | D303 1n4007 | Replace | Mauro Mascarenha Tel. 88 981422821 Parazinho - Ceara |
| SAMSUNG |
CL21Z58MQ
|
Vertical closing at the top and doubling the image, tsound is no power supply on pin 6 of the vertical ci | D303 1n4007 | Replace | Eletrônica Mauro Mascarenha tel. 88 981422821 Parazinho - Ceara |
| SAMSUNG |
CL21A551
|
Vertical closing at the top and doubling the image, tsound is no power supply on pin 6 of the vestical ci | D303 1n4007 | Replace | Mauro Mascarenha Tel.(88) 981422821 Parazinho - Ceara |
| SAMSUNG |
UN32FH4205
|
Totally inoperative. without any reaction. | Power supply board diode- dm807c- (lt3137) in total short. | Carlos Maia | |
| SAMSUNG |
UE32D4003BW BN44-00472A
|
Does not remain on standby. Turn off with the remote control, the TV turns off and then turns on again. | Filtering on 5v and 12v lines | Replace 5 and 12v electrolytics at the power supply. cm858 and cm860 | cartened |
| SAMSUNG |
PL51F4000
|
Tsound is no image, the LED is blinking | In my case c5072 102 1kv those blue ones on the ysus board in short, be very careful with them, just look carefully and you will see it with a hole or crack | Replace c5072 or those blue ones that have a hole or crack | beto2828 |
| SAMSUNG |
UN49K6500AG-CURVA
|
Turns on normally.leds light up.no image.on t.with only 12v.fuse f2-3a open.measuring the power supplys for mass, avdd was found to be only 2 ohms.measuring the continuity for the screen, the last 1uf smd capacitor to the right of the shorted display flat. | Changed the capacitor and fuse TV returned to normal with image and sound. | gesuino | |
| SAMSUNG |
CL21K40MQ
|
League without video with black stripe on the horizontal side, | Diode, d405 1n4148 next to the video connector | DJ PITUKA | |
| SAMSUNG |
UN32FH4003GXZD
|
Tv doesn't light up standby led, power supply ok when removed power on off pin.... then you condemn main board, but it's not... | When pressing the ic 1501 next to the varicap block, it worked | Resolder using a thermal blower or, if possible, with a soldering iron and go for it... | ELETRÔNICA ZANAGA |
| SAMSUNG |
UN32F5200AG
|
Dead | Rewrite eprom | CROCLARO | |
| SAMSUNG |
UN32D4000NGXZD
|
It doesn't turn on, and just has the standby LED blinking. | Defect on the power supply board. | Repair of the power supply board, changing the 100x16v cm806 capacitor and placing a 100k resistor from base to ground on the qm855 transistor. | rafaelmoraes99 |