Search: toshiba
Results: 5617
Make Model Symptom Problem Solution By
TOSHIBA TV 1454(P)
power supply varying flashing LED 20K tripote at RP 501 power supply replacement Beto
STI SEMP TOSHIBA DL3254
No picture, only the lit LEDs/backlight SMD CD17 Capacitor shortly on the display/von plate Remove or replace CD17 on VCON Wsmartcell
SEMP TOSHIBA LC3246 B WDA
After much insisting it on and turns off immediately. All tensions, capacitors and connectors were checked. Guilty was the button turns on and off with the worn membrane. MarceloPiranga
SEMP TOSHIBA 40L2400
Flashing fast light and power supply-bomb N 802 altered replace n 802 av 9889 Ric
SEMP TOSHIBA DL3245I(A)
Don't turn on, stand by red CI N801 (FR9889) defective. Enter 12V no more had at 1.15V at the exit. Alessandro Barcelos
TOSHIBA 40L2400
Turns on, then turns off Voltage regulator
TOSHIBA 48L2400
missing +5v Before replace the FLS206MR, replace the NB955 photocoupler (defective) HAHNRAHN
TOSHIBA 48L2400
Nor +5v Before replace the FLS206MR, replace the NB955 photocoupler (defective) HAHNRAHN
TOSHIBA 32L1500
Does not turn on, the standby LED does not light up replace the IC that provides 5v standby N802 (FR9889) ANTENA VIDEO
TOSHIBA 1022
VERTICAL CLOSED. LINE IN THE CENTER. CAPACITOR 2.2/50UF WITH LEAKAGE REPLACE CAPACITOR C303. BICHARA
SEMP TOSHIBA LEM9
Lem9
Only in standby does not turn on After researching a lot, I found the 9v d431 with leakage. The 9v supply was low. D 431 zener de yazh Lopes tv
SEMP TOSHIBA 2051 NAV
U18
TV turns on normally, but with a hissing sound in the font, it appears to be in the flayback Is tsound a dry or leaking capacitor, check c865, c448, c435 and C864 In my case it was the C864 with low SR DTEC eletronica Massapê ce
SEMP TOSHIBA 2051 NAV
U18
TV turns on with a line in the middle of the screen as if it were vertical and shaking as well as shrunken on the sides When measuring +B it was at 73 volts and all voltages were half replace photo coupler or strw of the primary power supply, in my case it was the strw leaving the voltages low, I made the replace and the TV returned to operating normally DTE Celetronica Massapê ce
SEMP TOSHIBA 32L2400
Flashes immediately, without picture + with sound Open LEDs. replace the bars, remove resistor 765 from 2R2. The voltage will drop to 82V, giving the new bars more durability and a guarantee of never returning with the same defect. IM TECH
SEMP TOSHIBA 40L5400
Does not turn on, standby LED flashes red Voltages on the plate oscillating Swap N801 and n806 both fr9889 Higorot
TOSHIBA 46WL800(A)I3D
Sometimes it doesn't turn on, or takes a while to turn on, insisting it works. When the tcon cooler fails, it doesn't start. C7200 sold out/leaked (main PCI) electronicssupplyparts - Gramado/RS
TOSHIBA TV2999KMS
Lem7
picture aliasing Cd11 de 10mf/100v Cd11 Lopestv
TOSHIBA 32U35KB
TREMULOUS picture T-CON RETIRE R28 (RESISTOR SMD) T-CON DISPLAY -SOLVED RIC TEC -11 93096-7971
SEMP TOSHIBA TV 1454 PSL
Tv tubo
Turns on and off, LED flashes every 5 seconds Electrolytic capacitor c235 of 47/16v. was shorted. replace c235 Lopestv
TOSHIBA TV2051NAV U18
U18
Doesn't turn on Microprocessor Cleandro da Silva bertolete