Toshiba Repair Tips
Search: toshiba
Results: 5591
Results: 5591
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| TOSHIBA |
1721TB
|
Field bottom cramp | C303 2µ2 50v on pin 13 tda8659n | ||
| TOSHIBA |
1721TB
|
Dead | Check resistance from collector of line o/p transistor to earth. if low and the transistor is ok replace the lopt | ||
| TOSHIBA |
1720RB
|
No brightness control | D204 1n4148 clamp diode leaky | ||
| TOSHIBA |
1720RB
|
Line tearing when warm | Q801 strd4412 toshiba 23314510 | ||
| TOSHIBA |
1720RB
|
Dead 500ma fuse blackened | 6r8 7w surge lim o/c; mains smoothing cap s/c; strd4412 chopper s/c; r2m overvolts diode s/c - all caused by loptx | ||
| TOSHIBA |
1720RB
|
Dead - no line drive - ht present | Loptx shorted turns | ||
| TOSHIBA |
1720RB
|
Dead | Dry joints scan coil plug | ||
| TOSHIBA |
159X4Y
|
Low sound. | Check for burn up on print , r448 ( 2Ω , 1w ) o/c , d404/5 s/c | ||
| TOSHIBA |
159R4B
|
Text lines at top | D203 | ||
| TOSHIBA |
155T9B
|
Sync int or missing | Dry joints on screening can earths near mains sw | ||
| TOSHIBA |
155T9B
|
Switching to standby after 30 mins | Order flashover kit pt no. tcp0074 | ||
| TOSHIBA |
155R9B
|
No frame. | R107 ( 10r ) | ||
| TOSHIBA |
155R9B
|
Line shift , band down rh side | D403 6.2v zener. also r402 , pn - d403 - 23115604 , pn - r402 - 243661123 | ||
| TOSHIBA |
155R9B
|
Bright line at top of screen | C313 100µ 50v | ||
| TOSHIBA |
155R8B
|
Drifts off tune , wont stop on search tune | Ca36 0.01uf aft leaky | ||
| TOSHIBA |
1510TBT
|
No text ( pic blanks ) | Cf114 | ||
| TOSHIBA |
1510TB5
|
Int shutdown | Dry joint r420 - near loptx | ||
| TOSHIBA |
1510TB
|
Tuning fault - micro replaced caused no txt or tuning | Wrong micro fitted - when correct one fitted (tb5 vers) all ok | ||
| TOSHIBA |
1510RB
|
Field lin - no bottom scan | C303 2µ2 50v near xtal 501 | ||
| TOSHIBA |
1510RB
|
Dead set , buzzing noise | Q803 2sc3425 pn - a6361601 |