☰

Repair Tips




AIWA
BEKO
CCE
CINERAL
DAEWOO
FUNAI
GRADIENTE
GRUNDIG
HITACHI
ITT
JVC
LG
MITSUBISHI
PANASONIC
PHILCO
PHILIPS
PIONEER
RCA
SAMSUNG
SANYO
SHARP
SONY
THOMSON
TOSHIBA
VESTEL


Search:
Results: 88017
Make Model Symptom Problem Solution By
SAMSUNG UN48J5OOO-5200-5500
With sound screen on without video Tcom bn98-06143a with CD1 and CD2 (10mf smd) shorted Replace SANTOMEL
PHILIPS FX30X
The display written philips turned on and stopped wsound it did not obey any command The panel key was giving resistance on a high scale without being pressed, wsound the defect in mine was in the mode key, however I believe that another key could also cause this defect Changing the front panel key, preferably all LGD
PHILIPS FX30X
The display written philips would turn on and freeze and it would not obey any command Panel key that was giving resistance on a high scale even without being pressed, mine was the mode key, however I believe that another key could also cause this defect Changing the front panel key, preferably all LGD
PHILCO PH42 LED A
Stop, main defect, power supply ok R505 open Replace Alex Lopes
PHILCO PH42 LED A
Stop, main defect, power supply ok R505 open Replace Alex Lopes
NORTH TECH NT-55SMS
Doesn't start Power supply D204 (hsr5100) Brackmann
PHILIPS 21PT6436/78 E OUTROS DA PHILIPS
Very low sound after some time it improves a little. C 2444 of 470mf 19v To replace. but you have to be very careful when replacing it, because tsound is a very thin track that goes from the positive pin of this capacitor to the vertical circuit. protection of this capacitor Ferraz
USINA 120 PRO LUS+
With or without load the relay keeps hitting 1m resistor changed, behind the 15v regulator, between the regulator and the transformer, replace without measuring! Replace 1m resistor between the regulator and the transformer, under the glue! Rodrigo cofferi
USINA 120 Pó LUS+
With or without load the relay keeps hitting 1m resistor changed, behind the 15v regulator, between the regulator and the transformer, replace without measuring! Replace 1m resistor between the regulator and the transformer, under the glue! Rodrigo cofferi
CCE D4201 STILE
Sound comes out when turned on, but the lamps only blink when turned on, if it doesn't solve it by changing the capacitors, remove the cn01 plate and place a +/- 82z resistor between the 000 rj5 and the middle pin of z2 Https://youtu.be/ax0vabx4yus Https://youtu.be/ax0vabx4yus sound's the video of the guy who gave the tip Rodrigo cofferi
SAMSUNG UN32-40F5200-5500
It has sound, LEDs light up and no image Tcon co open 3a fuse and smd capacitor ce1 (10mf) Replace SANTOMEL
PHILCO PTV49F68
Sem backlight Led bars with problem, after replacing and calling to test bars did not light up. This TV has protection, if the TCON is not connected it does not release the voltage from the LEDs GABSENS
LG 22MA33N-PS
TV arrived dead. standby off Capacitor c718 and c716 (change without measuring) after replacement the TV started working 100% again George Luís
LG PSPU-J902A 903A EAY6069801 901
No 5v stby ic301 dead Replace f301 and f302 (1a), ic301 (str-w6252), r305 (0.39 ω), r927 (22 ω), c307 (100µf/50v), zd801 (15v), d305 (1n4007) J.S.
LG PSPU-J902A 903A EAY6069801 901
No vs go Replace f801 (4a), q801 and q802 (pn11nk50zfp), d801 and d802 (1n4007), r801 and r803 (51 ω) , ic801 (l6599d) J.S.
LG PSC10273F EAY59544701
No 5v stby ic301 dead Replace f301 and f302 (1a), d305 (rl307g), ic301 (str-w6251), r305 (0.33 ω) , c307 (22µf/50v), zd801 (15v) J.S.
LG PSPU-J808A EAY58349601
No vs go Replace f801 (4a), q801 and q802 (pn11nk50zfp), d801 and d802 (1n4007), r801 and r803 (51 ω) , ic801 (l6599d) J.S.
PHILIPS 42PFL3604D
Turns it on, then turns off the lights, normal audio I found 3 loose light bulbs and cleaned and resoldered them. Everything worked perfectly. Medeiros Barbacena MG
LG 42LA6130
When turning on the TV, the blacklight LEDs flash once quickly and the TV goes into protection C201 electrolytic capacitor 1500uf 10v on the power supply board Half capacitance replace c201 and tv worked perfectly manin
LG CM9740
Bluetooth doesn't work Bluetooth bt e2p err, I tried to reset it continued with the same message, I replaced the bluetooth card with another one, solved it worked normally Defect resolved Andre