Repair Tips
Search:
Results: 88106
Results: 88106
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| PHILIPS |
32PFL3008D
V2.11 |
Duplicated or inverted screen | Type 062598 menu 003 and run for the hug | Mario Moreci | |
| TOSHIBA |
DL-4845
|
Flashes the logo | Defective LEDs | Remove r787 r789 r791 r792 r794 r795 r724 r723 r782 r783, remove c702 and replace it with a 330r resistor, remove r766 5k1 and replace it with a 10kr resistor | Marcos infotron-ltda |
| LG |
RP20CC97
|
Doesn't start. led off | Saida horizontal tt2170 | Replace the horizontal output tt2170 | NILMAR |
| SEMP |
LC4051FDA
|
Power supply squeaks traffic turns on time does not turn on 12v power supply oscillating with 8v does not arm. | Db960 auterated swap . | Replace without measuring and start thanking... | el. monitor cafelandia pr. |
| SAMSUNG |
LN32B350F1
|
TV sometimes turns on, sometimes it doesn't. insists on staying on standby. | Capacitor cm852 - 1200 microfarads, 10volts estufado | Replace the component with a new one | Hernandes G. Bandeira |
| LG |
RP20CC25
|
Short fly-back | Fly-back | Replace o fly-back 6174v6017a | Sinailson furtado |
| PANASONIC |
TC-32LX80LB
LH80 |
When turning on the TV, the LED turns green and then activates protection, flashing red twice. | Defect on the inverter board, 3 bad 680x35v capacitors and open 8 amp fuse for the 24v power supply. Check that tsound is no short circuit on the rest of the board. | Changing capacitors and changing fuses. | rafaelmoraes99 |
| PHILCO |
PH21MSS
|
Stand by blinking, tries to turn on and fails | Capacitor c833 and c828 stoves | Replace of 2 parts | Hugo |
| SAMSUNG |
CL21Z43MQ
|
Connects with audio without image | D 242 or 241 | novin | |
| SHARP |
LC32SV202L
|
Doesn't start | 103 | Power supply has 5v and does not have 12v and 24v. pin 2 of ic9103 with low earth resistance (gnd). | jjsantosneto |
| PHILIPS |
42PFL3508G/78
|
Philips soon appears, sound remains, defective LED bars | Change panel LEDs | Luizsantos | |
| PHILCO |
PH42M30
|
Stand bye LED lights up dimly and doesn't turn on | Ci regulator 3.3v n805, measuring 2.5 volts | Replace | HP ELETRONICA |
| TOSHIBA |
U11
|
It turned on with a white screen all normal voltages when I lowered the screen the screen was blue but without any type of character just a little sparkle next to the blue | Memoria eprom | Good luck (edfesom) | Edfesom |
| LG |
21FJ6RB
|
When connecting the TV to the socket, the stand bay LED turns on by pressing the TV Video button, the stand bay LED turns off the relay, but it does not generate high voltage | Breastfeeding, fr 403 | Replace the r835 from 2k7 replaced to 8k and also replace the fr403 from 1r2 open and the TV will be working. God be praised! | Sinailson furtado |
| PHILCO |
TPF2922
|
It doesn't turn on, the stand by LED keeps flashing, | Replace cap ,c927 ,2,2x100v e c943 10x100v | DJ PITUKA | |
| LG |
42D460
|
Does not turn on - normal power supply, killing the 3v5 when connecting to pci main | C519 shorted on the main board. | Remove c519 | duc40rj |
| SAMSUNG |
UN32D5500
|
Restarting itself after a while on | Nand flash memory - ic1302 (main board) | Swap nand flash memory. It is necessary to save the firmware in memory or buy it already saved. | I.G |
| SAMSUNG |
CL21C551ML
|
Plate or cushion defect | R 411 82k gray red orange | AIRTON PARAIPABA CE | |
| PHILIPS |
47PFL4007G/78
|
Takes time to exit standby | 3v3 regulator changed on the main board code: u701- reference: g1084-33 | Check its output, as in the test it is good | Ceará |
| LG |
14SB1RB
MC059D |
Normal image and sound in the av, but in the rf tsound is only a squeaky image and sound. | A mini capacitor changed position: 506, colors: orange, red, red =0.22uf giving 0.8uf | Capacitor position=506 on the board, replaced | JOCIMARIO OLIVEIRA |