Search:
Results: 88148
Make Model Symptom Problem Solution By
LG 32LB9RTA
Voltage 3.4v was 1.8v Fet transistor q205 with leakage killing voltage Just replace and run for the hug thanks everyone post because I already got tips tsound so it's worth helping each other hug Sebastião Rodrigues
PHILIPS 29PT4631/78
Wouldn't turn on without +b Photo coupler 7515 burnt Reginaldo Alves
PHILCO PH32S61DG
Red LED lights up but then goes out Update software Edson SP
PHILIPS 32PFL3506/F7
Standby LED blinks but does not start After a lot of searching I found the shorted speaker that activated the power supply protection Marco
PHILCO TP1410 TP2010
Does not turn on, relay keeps knocking R927(120kω) open Replace r927 Edson SP
LG 32LP560M
The LEDs light up but the image is not visible, sound is normal. Defective IC401 voltage regulator integrated circuit Edson SP
SHARP C1417
Doesn't start Capacitor c724 exhausted Edson SP
PHILIPS 32PFL7762D/12
LC7.5E LA
No image and no sound. with OSD menu, white screen, no tuning. Main board Edson SP
RADIO PORTATIL TOSHIBA TR-450
Doesn't start Transistor d2882 power supply switching changed. Remove and replace an in4007 diode connecting from the collector to the emitter. MARCONES DE ARARIPINA-PE
AOC L32W831
It doesn't turn on but the blue LED lights up, without 24v from the power supply. Replace hs5(p80pf55), ic951(l6599) Mantunes
AOC L32W831
Does not turn on without 5v Did he knock? Mantunes
AOC D32W831
When turning on, the LED turns blue but does not work Possible problem on u602 and u701 Can be replaced for u602(s111733pi) and u701(aic-1084-33pm) Mantunes
AOC L26W831
Screen turns off after a while, backlight stops working Check r34(100kω) and c9 Mantunes
CCE D3201
Doesn't start. Verificar replace. u1(ncp1607b), q3(lmbt4403lt1), q4(ndf02n60z-1g), r49(1kω), r50(1,5 ω), r51, r51a(4,7ω) Mantunes
CCE TL660
After some time it works well, the display turns off The bl/on voltage drops until the backlight turns off Check for leaks/dirt between the bl/on line and the ground (gnd). to clean Mantunes
SAMSUNG LE32A559 BN44-00208A
After turning it off, it will not turn back on unless it is removed from the power supply. Check RP809, RP810, RP811, RP812, RP816 and optocoupler. Mantunes
VESTEL 17PW26
Doesn't work Uf5402 diode Replace diodes Mantunes
SEMP TOSHIBA TV2977(A)SL
SL-91
The TV turns on the standby LED, starts and cuts out, sometimes it turns on normally, the image disappears and tsound is only sound or sometimes it doesn't turn on. Faulty memory 24c16 memory swap. Celinvds
SEMP 2134
SK11
Power supply regulator Cold soldering Resolution and good luck Jose michel
SAMSUNG CL-21M6MQ
LED is on, when you turn it on, when you press power, the LED turns off +b and resets and the TV does not turn on The resistor, r831 of 123k changed to any value. just change CST ELETRONICA SERROTA SENADOR SA