Repair Tips
Search:
Results: 88182
Results: 88182
| Make | Model | Symptom | Problem | Solution | By |
|---|---|---|---|---|---|
| SHARP |
C1413
|
Doesn't work: turns on and cuts off | D603 shorted | badri | |
| SHARP |
C1413
|
With sound, with scrim acting, without image | D601 in4148 com flake | badri | |
| AMPLIMATIC |
ET500
|
Buzzing sound image with vertical lines passing through the panel LED image pulsing | Oscillation in the electrical network | 33x400v power supply electrolytic capacitor | SYSTEM OF A DOWN |
| PHILIPS |
20PT4331
|
Can't turn it on, holding the keyboard works quickly with the vertical closed and if you move the scrin it works normally | R 3491 amended | This resistor presents various symptoms depending on its replace | eletronicarotary |
| PHILCO |
TP1454 TP2054
|
Vertically closed, and turns off with the LED flashing. | Stv9302 e d909 e r910 e r912 | After changing the IC, the TV came with a retraced strip on top and the rest of the screen was completely black, the diode was shorted and the two 0.47r resistors were open | Ádrian Chapadão do Céu-Go |
| LG LCD |
32LG80FD
|
Doesn't start at all | See r526 | ||
| TOSHIBA |
TV2982
LEM8 |
High power supply, 175v | C819,4750v | jps, eletr,c,grande | |
| TOSHIBA |
TV2959JFS
|
Stand by LED lights up and then turns off | Capacitor c 819 10mf 50v | Replace the same | TIAGO.ELETRO |
| CENTURY |
BR2014 SLIM
|
Normal league with black screen | Df11 | Replace it | antonio nobrega patos pb |
| SEMP |
1431 NACDC
U18 |
No video via AV on normal channel 3 | Rv02 47r open | Replacement | josimar |
| SONY |
KDL-46EX405
|
Does not turn on blinks red LED 2 x | Verificar q 6101 6102 e r6536 | Sidney Alves | |
| CCE |
TVS 2910/FS
|
Cushion effect, | Replace (q406) 2sd1408 (q407) bc846, use bc548 and r-852 (100r) | Ademar Videira SC | |
| LENOXX |
TV PH14C
|
Low power supply oscillating | V553 -c1815 leaking | Replace | LUCIANO |
| CCE |
HPS2185FS
|
Hitting the relay and the 103v box power supply. to 65v. | Replace (q807 smd) that works ok!!! | ||
| LG |
32LG30R
|
Does not turn on lights and no sound, no 24 and 12 power supply. | Change c118 (220nf), it is connected next to r128, tsound are cases when the r 128 is changed and components are removed and it continues to not turn on. replace the r 128 with a 15k one, if it doesn't work increase it to 22k, remove c108- zd111 and z112 and replace c 207 and 208, both 3300/10v. | joaomvjr | |
| LG |
CP-15Q90
|
Does not turn on stand by led | Capacitor 470pf x 2kv with leakage - position c 417 | Matões A. Técnica | |
| CENTURY |
PR 2010
|
Century pr2010 receiver without image (solved) | Working normally with voltage at the rf input (tuner) causes open rf3 resistor | Matões A. Técnica | |
| SONY |
KV29FS110
|
Side horizontal strip | Q512 leaking | Replace for 2sd 2059 | ELETRONICA MAURI JUNIOR |
| CCE |
HPS2981
|
TV doesn't turn on. | When trying to turn it on, it makes a kind of chirp, beep, beep, beep and it doesn't turn on, it causes c403=560uf in a short, close to the fly-back. | The capacitor was replaced and it looks great. | Armando de Olímpia Eletronica EvoluSom |
| MITSUBISHI |
TC2010
|
Cold solder on york cable horizontal output shorted and kinescope cut off toasted 10k abl resistor | After replacing the defective components, the image had little contrast, as I checked the abl line and tsound was nothing bad, I concluded that the tool was damaged. | I disconnected pin 10 of the ci, everything was done, the image was normal | Evandro/sousa astel eletonica ceara |