Cce Repair Tips

Search: cce
Results: 4816

Make	Model	Symptom	Problem	Solution	By
CCE	HPS-2991	It turns on normally, after turning it off and on again it oscillates, with no sound and no image.	C901 102k change it.		Igtec
CCE	HPS-2118	As soon as it turns on, it goes into stand by in a few moments	Replace with new transistors: q-703,q802,q803,q804,q805		guaracy borges
CCE	HPS-2991	LED on, won't turn on	Dido zener z,zv dz-808 em tsurto		ladmyr bh/mg
CCE	HPS2171FS	Starts, then turns off and the LED flashes	G403 with leak	Replace component	CSOM
CCE	HPS1471	Normal sound with image showing blurred colored spots	Open resistor fr403		alexandre
CCE	HPS2991	Normal supply, oscillates horizontally, flyback voltages are all low	Open polyester capacitor c409	Replace the same	Elet aeb
CCE	HPS2909	It stays on standby with normal power supplys, when it turns on, the low power supply does not turn on anymore	D823 open	Replace the same	PAULO
CCE	DVD-4290	DVD keeps turning on and off, turning on and off and not reading	D805 power supply diode shorted		eletroclaudio
CCE	HPS-2902	RGB defects and only displays video when enlarging the screen	R904, r910, r916 (100k)	Check r904, r910, r916 (all 100k)	MACCELETRONICA
CCE	HPS2197FS 10/02/2010	When turned on, it turns off. right away	None elect of 47/160 - c825	Replace the same	eletronicaapolo
CCE	HPS 2071	Vertical closed	Q802, 804, ic301	Mainly replace the q802 then the others	Claudecir Da Silva Paula
CCE	HPS 2025	Dark image	Capacitor 102 lsk in the test is good but the screen is still dark, just change it and go for the hug		CARLOS AUGUSTO ELETROSILVA CANAVIEIRAS BAHIA
CCE	HPS2171FS	Turning off with blinking LED	Shorted eth protection circuit	Dz401 de 4v7 emcurto	uti eletrônica
CCE	HPS1405	Does not turn on b+103v normal and 180v low with 102v	Chap. ceramic c410(101)	Help yourself leave your tip	ELETRONICA ARNI>L. LEAL-SC
CCE	2092	TV doesn't work, and the LED doesn't light up and it has 103 volts plus b.	It was then verified that tsound was no 9 volts on the emitter of q802 a bc337, from the base of this tr to ground tsound is a 10v zener and it was shorted and killed the 9v.	I replaced the zener with a 9v1, and it was... ok.	Armando da Eletrônica só Tv.
CCE	HPS-1407	Cutting signal from the seletronic only remaining fi	Replace q101		guaracy borges
DURABRAND MESMA CCE	DB-2905	It seems to oscillate but it doesn't generate enough current	C 409		fabiusmax
CCE	TVS 2910 L	Does not turn on, the LED flashes quickly	C 825 100x160	Replace	felex
CCE	HPS1471	When turned on, it came with the vertical closed and then turned off by itself	Q802 bc337	Bc 337	Danieleletronica
CCE	1771	Switching on and off with the vertical closed	Q802 bc337