Cce Repair Tips

Search: cce
Results: 4834

Make	Model	Symptom	Problem	Solution	By
CCE	HPS 2071D 2071	TV turns on with vertical closed with a yellow line and then turns off and on and off	I replaced the q802 and q804, even though they had a good measurement, replace them anyway and put new ones!	These transistors q802 and q804 are responsible for the 3v and 8v supply (volts)	Daniilo20
CCE	HPS-2071	Does not oscillate, rainbow screen appears, colorful vertical lines	Ic301- la78040n		Luir
CCE	HPS1415 ...	Interlaced lines at the top of the screen.	C357=100uf for 35v without capacity.	It was replaced and it was ok.	Armando
CCE	HPS-2171FS	I replaced the original flayback (bsc25-0206h) with the one that comes with the tat2104 scheme	Got a saturated shine	I just took the 47kpf c424 and that was it with a normal image	fabiusmax
CCE	HPS 2901	No weapon,	Change power supply capacitors 100 x 160		ELIZEU RIBEIRO - DF
CCE	HPS2004	Doesn't work at 110 only at 220	Cap 812 47m 63v		rhaus
CCE	HPS-1490	Off the air, in fi, normal in av	After having discarded the varicap, ci 501, capacitors, resistors all from the video part, it was only the ci702pcf8285e-2 (memory). Replacing the problem solved it.		jarbas santos
CCE	HPS2185FS	Standby flashing - when you press power, the relay activates but does not work and the television starts flashing again	Q-802, qd-803 and que-804 with problems, replace them	Leave me This email address is being protected from spambots. You need JavaScript enabled to view it.	Saul
CCE	HPS 2991 FS	Turns on normally, but the screen is black and tsound is no sound	C901 on the 102k tube board, just change it, good luck		edson gta
CCE	HPS1473 VARIOS MODELO	Turn on and off	Q 802 bc327 e q 803 bc337 colocar novo		carlinho bitti
CCE	HPS-144	Protection sometimes works for 1 to 2 minutes and turns off and then turns on	R405 (smd) 3k9 changed to +or- 5k	Just in case, check c 415 6k8 1600v	RTZCOMPUTER
CCE	2991	LED comes on and doesn't turn on	Replace c 409		antonio nobrega(patos.pb)
CCE	HPS2901	Turns on with sound and without image	Ci 8177 just replace good luck		This email address is being protected from spambots. You need JavaScript enabled to view it.
CCE	HPS1470 Q ..	TV with dark bars on the sides and vertical white lines; when the signal comes in, the image and normal sound distort.	R-427=4k7 was open.	It was replaced and it was... ok.	Armando
CCE	HPS-14R	No high voltage	C 404 - 330 pf 2kv
CCE	HPS 1402 E	No image, only sound, +b with only 33v, does not generate high	C 825 47mfx160v sold out		Manoel
CCE	HPS 2002D	Vertical with stripe from bottom to top in the middle. and with line in the rest of the image.	C425 with loss of capacitance.	Be careful, sometimes the d301 malfunctions.	Tec Vídeo
TV CCE	HPS1405B	Does not oscillate, filament off.	Cold solder on pin one of the fly-back.	It was just resoldering and it was ok.	Armando
CCE	HPS- 1402B	Does not turn on b+ 123v normal	Horizontal trafo Just change it	If all technicians are aware of putting out tips, it will help you. hug good luck ass: arni	ELETRONICA ARNI, LEOBERTO LEAL-SC
CCE	HPS-2091	TV had all voltages ok. Tsound was 125v on the b+ of the fla back but when the TV was turned on it dropped the +b voltage to 70 volts.	The bad 100mf /160v supply capacitor	I replaced it and it was left	This email address is being protected from spambots. You need JavaScript enabled to view it.