Search: panasonic
Results: 2900
Make Model Symptom Problem Solution By
PANASONIC EURO 2 TX21MD1
No sigs Dry joints 82r sm resistors in tuner
PANASONIC EURO 2 TX21MD1
No signals Dry joints tuner
PANASONIC EURO 2
Yellow smearing Vdp3108-25 col proc chip ic601
PANASONIC EURO 2
Txt missing - displays "p100" & "text****" C3508 0µ047 o/c sm cap video feed to txt proc chip ic3502
PANASONIC EURO 2
Txt characters have parts missing Vdp3108a vid proc chip faulty
PANASONIC EURO 2
Tripping slowly - ok when plug w7002 dis'd on audio panel Audio psu dead - r7000 150k & r7005 180k o/c - the i2c bus was being dragged down by the inactive chips on the audio panel
PANASONIC EURO 2
Tripping - due to field collapse Replace field chip & sm tfmr faulty/dry joints
PANASONIC EURO 2
St/by only - initial burst of eht Ic1203 earom
PANASONIC EURO 2
St/by only When ic1203 earom chips pins 4 & 5 (clock & data) desoldered pic came on but dark. try replacing chip x24c016p-p1 or r558 in beam lim cct o/c
PANASONIC EURO 2
St/by mode difficult to enter/leave Sticking relay contacts rl610, clean or replace pt no tse10818
PANASONIC EURO 2
Snowy signals C111 0.068µ leaky
PANASONIC EURO 2
Snowy pic with smeary red & white - txt ok Same via scart - dig proc chip vdp3108-29 faulty. pan supply improved type along with sm caps, eeprom & instructs
PANASONIC EURO 2
Servicing the panasonic euro-2 chassis See tv mag jun 1999
PANASONIC EURO 2
Self check mode To enter this press the "status" key on the remote at the same time as pressing the "programme down" button on the tv. beware as this procedure will erase all previously stored channels & the set will need retuning.
PANASONIC EURO 2
Relay pulsing once per sec When over-ridden ht very low - c637 2n2 polyester cap pin 2 i611
PANASONIC EURO 2
Ragged verts & pic breakup Ic601 dig at proc chip vdp3108appa1
PANASONIC EURO 2
Osd has white flecks, no red on txt, no/weak sync Ic601 vdp3108appa1 vid proc chip
PANASONIC EURO 2
No line drive, psu running, led flashes once per min Replaced jumgle i/c eeprom kit tzsek002. after fitting go into self test to unlock tuning memory
PANASONIC EURO 2
Main psu remains on in st/by causing bright lights & phospor burn to crt Relay rl6101 on front panel sticking - replace (pt no tse10818) & r668 on panel e (& also crt!)
PANASONIC EURO 2
Int field jump/jitter at bottom of screen D507/d508 and r507