Panasonic Repair Tips

Search: panasonic
Results: 2911

Make	Model	Symptom	Problem
PANASONIC	Z5 CHASSIS	A look at the panasonic z5 circuit	See tv mag aug - oct 1996
PANASONIC	Z5	Trips with st/by led blinking	R525 300k 1/4w replaced with 1/2w (under r564 near pug e7)
PANASONIC	Z5	Tripping with st/by led blinking	R525 300k 1/4w replace with 1/2w (under r564 near plug e7) other causes- r810, r813, r818, r821 330k, c823 10nf 500v subber cap
PANASONIC	Z5	Tripping	D806 au2avo (measuered ok)
PANASONIC	Z5	Tripping	All these items are in the psu primaryr810/r813/r818/r819/r821[330k] c823[10nf 500v] snubber capacitor
PANASONIC	Z5	No picture sound ok - blank raster	No line pulses at pin 38 ic601tda8361- q504 sm bc847b faulty
PANASONIC	Z5	Not cabbage	Eeprom ic1205 faulty - no set up data for ic601
PANASONIC	Z5	Int thick lines across screen	Dry joints tuner
PANASONIC	Z5	Dead one quick flash of standby light at switch on, very faint ticking from power supply, low 125v supply	R813 and 821, 330k 1/2 watt
PANASONIC	Z5	Dead no st/by light	Ic801 str51424
PANASONIC	Z5	Dead but standby light on power supply chirping loudly, no 125v.	R812 33Ω metal film special from seme part no. erq12hj330.
PANASONIC	Z5	Dead , ic801 getting warm	D806 au02v0
PANASONIC	Z5	Dead	Replace d806 part. no. av02avo
PANASONIC	Z5	Dead	D806 au02v0 diode
PANASONIC	Z421V TX21GV1	Int switches off & on	Ic1807 top210 chopper chip
PANASONIC	Z421V TX21GV1	Flyback lines at top - txt ok	Remove by going thro' self test proc - press vol down on set & status button on hset
PANASONIC	Z4 TX21M1T/BK	Blanking from lhs with ragged edges	10µ 250v on main pcb rear edge
PANASONIC	Z4 TC15M1RP	Dead with str54041 & 2sd965r trs s/c	Also 4r7 surge res o/c - also replaced 10µ 63v & 100µ 6v3 elects on psu pri & check for dry joints
PANASONIC	Z4 CHASSIS	When chan stored in a prev stored location, all chans appear the same	Check for dry joints around link j10 on txt pcb
PANASONIC	Z4 CHASSIS	The panasonic z4 chassis	See tv mag sept - nov 1994